1.6T Lamination Hot Press (300x300 mm) up to 200C with Precision Pressure Controller - YLJ-HP-300G

Name: 1.6T Lamination Hot Press (300x300 mm) up to 200C with Precision Pressure Controller - YLJ-HP-300G
Brand: Premier Solutions Pte. Ltd

0.0/5 rating (0 votes)

Description

YLJ-HP-300G is a Pneumatic Hot Press with a precision constant pressure controller within +/- 0.5 Kg up to 1.6T and 200°C. It is designed for testing the effect of pressure on solid-state battery performance, and also can be used for the SEI formation and lamination of solid-state battery electrodes under hot pressing. This device is Ar gas compatible and can be used in the glove box.

SPECIFICATIONS:

Pneumatic Press	Max. Load: 1.6T ( 1600 Kg) Pneumatic cylinder travel distance 200 mm Max. Working area: 300 mm W x 300 mm D ( -12"x12") Max. working height: 0 - 110 mm Driven by any standard air compressor or inert gas tank, which is not included. 0.2~0.8Mpa of air pressure supply is needed. Please click the picture below to order. Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.. pic1 pic2
Heating Plates	Two heating plates with two independent single-point temperature controllers Single point PID temperature control with +/- 1ºC accuracy Heated plate area: 300 mm W x 300 mm D Max. working temperature: 200°C (continuous) Heating Rate: 15°C/ minute Max. Power: 220V (50/60 Hz), 3000 W, single phase
Pressure Controller	Pneumatic cylinder bore size 125mm diameter. Digital pressure controller with PID tuning, which can keep the constant pressure at setting value. 30 segments programmable. (max working time: 9999 minutes for each segment) Pressure Accuracy: +/- 0.5 kg Optional: You may order the load cell below to calibrate the applied pressure force from time to time
Feed-Through (Optional)	If the press is used in a glove box, two separate feed-throughs are required One feed-through for gas tubes.($295.00/set) One feed-through for power and communication cords.($500.00/set) The feed-throughs are not included in the standard package, please contact us for more information.
Product Dimensions
Compliance	CE approval NRTL or CSA certification is available upon request at an extra cost
Warranty	One-year limited warranty with lifetime support (rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty)
Operation Demo Video
Net Weight	250 kg
Shipping Weight	350 kg