10T Lab Press with Separable Hydraulic Pump & Safety Cover - YLJ-10T

YLJ-10T  is a compact hydraulic machine up to 10 metric tons for materials/chemistry research laboratories to prepare the compound ceramic sample. YLJ-10  has a transparent protection shield and separate manual hydraulic pump, which makes it easy to repair and replace.

 

Max. Pressure	10 Metric Ton The pressure gauge is built-in
Gauge Pressure Value to Force Conversion	Actual Force Applied to the Cylinder (Ton) 1 2 3 4 5 6 7 8 9 10 Gauge Displayed Pressure Value (Mpa)） 6 15 23 30 38 46 54 62 69 76 Displayed pressure value to actual applied force conversion: 1 MPa = ~ 0.55 Ton The actual force applied to the vessel cylinder (Ton) is equal to the force applied to your working piece For calculating the actual pressure (Mpa) applied to your working piece, please follow the equations below:           P = T x g x 10/ (πr^2) P: pressure (Mpa) applied to your working piece T: force (metric ton) applied to the pressure vessel cylinder g: standard gravity. g ≈ 9.8 m/s2 π: ~3.14 r: radius (cm) of the pressure vessel (1.5 cm) *1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2
Hydraulic Machine	10 T Max. Hydraulic cylinder is moving downward up to 45 mm Cylinder diameter:    35 mm Working space:        125LX100WX135H ( mm) The manual hydraulic pump is separated from the cylinder for safe operation
Operation Temperature	10 - 40°C
Overall Dimension	( click the picture to see detail )
Optional	Electric pump with programmable pressure control is available upon request Pressing dies with various diameters are available upon request at extra cost
Net Weight	25kg
Shipping Weight & Dimension	160 lbs; 48"x40"x40"
Compliance	CE Certified
Warranty	The pressing machine was quality inspected in the USA, lifetime support is provided One-year limited standard warranty (Extended warranty is available up to 5 years at extra cost).
Operation Video and Instructions
Application Notes	The pressing die cannot be used for pressing powder with particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns powder to the pressing die to avoid damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps. Please clean the mold via ethanol after the completion of each experiment. Warning: Customers must always wear protective goggles during operation !!!