1100°C Max. Muffle Furnace (12x12x12") w/ Alloy Chamber for Debinding - KSL1200X-M-F

KSL1200X-M-F is a muffle furnace with a 310S alloy chamber and a working temperature of 1100°C.  The  9x9x10" refractory alloy chamber has a gas inlet and outlet which can remove bender or glue to prepare porous materials or fill inert gas for sintering oxygen-sensitive materials.   The programmable temperature controller is separated from the furnace for safe operation.

SPECIFICATIONS

Heating Chamber	Size: 12" x 12" x 12"  ( 304 x 304 x 304 mm) Capacity:  27 liters  Heating element:  Ni-Cr-Al  wire  inserted a high purity fibrous alumina Three sides heating Max. Temperature:   1200 ° C
Refractory Alloy Chamber	310S alloy chamber with hinged type door is placed inside the heating chamber Size:   9"x9"x10" ( 230x230 x 250 mm ) Capacity:  ( ~13.2 Liter )  8 mm ID gas inlet tube is put to the back of the furnace 8 mm ID" gas outlet tube is connected to the top of the furnace K type thermal couple is inserted into the inside chamber for temperature control Max. working Temperature:  1000° C Note:  This is not an airtight chamber, but it is enough to keep smoking leaking to damage the heating chamber For air-sensitive material, suggest use 5%H2 + 95% Ar to keep the sample from oxidation
Power	208~240V AC, Single phase, 50/60 Hz 12.5KW 60 A Breaker (installed) Note： Power cable included, but without the plug. Please install a plug on your own
Max Operating Temperature	1000° C with refractory alloy chamber inside  1200 ° C without refractory alloy chamber inside  Temperature Stability: ±1 °C Suggested heating Rate:  10 ° C/min
Temperature Controller	The FA-YD518P-AG temperature controller is included. Proportional–integral–derivative control (PID control) and auto-tune function 30 segments programmed with ramping, cooling, and dwelling steps Built-in over-temperature alarm and thermocouple failure alarm +/- 1 ºC temperature control accuracy Default DB9 PC communication port with PC operation software included Eurotherm temperature controller with +/- 0.1 accuracies is available at the extra cost
Product Dimensions
Net Weight	200 Kg
Warranty	One-year limited warranty with lifetime support.   ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
Compliance	CE Certified NRTL  (UL61010) or CSA certification is available upon request at extra cost.
Operation Video