Power | - OTF-1200X: AC 208-240V Single Phase, 50/60 Hz, 3 kW
- OTF-1200X-III-C: AC 208-240V Single Phase, 50/60 Hz, 4 kW
- Sliding Motor: 208 – 240 VAC Single Phase, 50/60Hz, 200 W
|
Sliding Furnace (Right)
 | - Sliding Single-zone Furnace OTF-1200X
- Sliding distance: 300 mm
- Total heating zone length: 440mm
- Constant temperature zone: 150mm (±1 °C) in the center
- Heating elements: Fe-Cr-Al Alloy doped by Mo
- Max temperature: 1200 °C (<1 hour)
- 1100 °C (continuous)
- 1000°C (under vacuum)
- Max heating rate: 10 °C/min
- Thermocouple: Type-K
- Furnace models and sliding distance can be customized, please contact MTI for options
|
Stationary Furnace (Left)
 | - Stationary Three-zone Furnace OTF-1200X-III-C
- Heating zones: 152.4mm (6") + 152.4mm (6") + 152.4mm (6")
- Total heating zone length: 450 mm
- Constant Temperature Zone: 200 mm (±1 °C) in the center
- Heating elements: Fe-Cr-Al Alloy doped by Mo
- Max temperature: 1200 °C (<1 hour)
- 1100 °C (continuous)
- 1000°C (under vacuum)
- Max heating rate: 10 °C/min
- Thermocouple: Type-K
- Furnace can be customized to other available models, please contact MTI for options
|
Processing Tube
 | - High purity fused quartz tube
- Size: 80mm O.D x 72mm I.D x 1800mm Length
- Max Pressure: 0.4 bar (5.8 psi)
- Max flow rate: 1000 sccm
- Workflow: right to left
|
Temperature Controller
  | - The FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
- Four K-type thermal couples are included.
- Optional PC control and software:
- The furnace may be operated by a PC with free software.
- We recommend you order a computer (laptop) from us to avoid software installation problems. For more information please click here
|
Temperature Controller (optional)
 | - All temperature controllers can be graded to the Eurotherm 3000 Temperature Controller with +/- 0.1°C accuracies. Click the pic on the left to view the full specs
- This package includes:
- One (1) Eurotherm 3004 controller for single-zone furnace
- Three (3) Eurotherm 3008 controllers for three-zone furnace
- Communication cables (RS485 - USB) and software
|
Vacuum Flanges | - Stainless vacuum flanges with a vacuum gauge ( click picture below to see details) are installed on both ends of the tube.
- Water cooling flanges are avaiable upon request, if exhaust cooling is needed.
-
 |
| Sliding Control | - Double Linear Sliding Rails made of Cr-plated steel
- Electric motor with manual control of speed and direction
- Limit switches for motion stop
- Sliding length: 300 mm
|
Vacuum Level | - Limited by pump ( pump is not included, click on pictures to order )
- 10E-5 torr can be achieved via molecular pump
- 10E-2 torr can be achieved via a mechanical pump.
|
Optional for upgrade | - 1-9 channel gas mixing and delivery models is available ( click picture 1 below to order )
- You may need a cold trap to condense the exhaust gas (Pic. 2)
 Pic. 1  Pic. 2 |
Dimensions | - Assembly: 2250 mm L × 450 mm W × 680 mm H
 |
Net Weight | ~ 120 Kg |
Shipping Weight | 400 lbs |
Warranty | One-year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below). |
Compliance | - CE Certified
- NRTL or CSA certification is available at extra cost.
|
Application Notes
Click here to learn the installation of a gas regulator | |
Warning | - Fast sample cooling can be achieved by sliding the heating chamber away. Please wear protective gear such as heat resistant suit & gloves if you intend to do so. DO NOT TOUCH THE TUBE SURFACE WHEN IT IS HOT!
|
Operation Instructions |   |
