Furnace structure  | |
Power & Voltage | |
Max. Temperature | 1200 oC |
Continuous Temperature | 1100 oC |
Max. Heating Rate | <= 20 oC /min |
Thermal Block Placement |  |
Heating Zone | Five independent heating zones: Each heating zone length of 152 mm Total heating zone length: 760 mm, ( nominal 800 mm L considering spacer ) - Max. Constant temperature zone 25" ( 635mm ) if 5 zone heated at same temperature ( within +/- 2oC)
|
Temperature Controllers  | - PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- Built-in overheating & broken thermocouple protection.
- Over-temperature protection and alarm allows for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Five K-type thermocouples (one for each zone).
- RS485 Communications Port.
- Optional:
- The furnace may be operated by PC by installing five control modules. Please order the MTS-02 control modules at extra cost.
- If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems. For more information please click here.
 |
Optional Processing Tube & Vacuum flange | The furnace can accept quartz or mullite tube with diameter 1" - 4“ diameter and minimum length 1400mm ( 55"), which is not included in the package. Please click the picture below right to order tube & tube adapter, as well thermal blocks ( Note: To accept 5" Dia tube, customer needs to contact MTI tech. the support team for details)  |
Product Dimension  | - Furnace:1035mm (L)x 385mm (W)x 370mm (H)
- Control box: 500mm (L)x 490mm (W)x 250mm (H)
|
Net Weight | About 85 Kg |
Warranty | - One year limited warranty for electrical parts.
- (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
Laptop, software & WiFi Control(Optional) | |
Compliance | - CE Certified
- All electric components ( >24V) are UL / MET / CSA certified
- The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. (pls click marks below to learn details )
|
Shipping Weight & Dimensions | |
Options (click picture to order at extra cost) | |
Notice | |
Operation Instruction |  |
Application Note | - The tube furnaces with quartz/mullite tube are designed for using under vacuum and low pressure <0.2 bars / 3 psi / 0.02 MPa
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- * Vacuum pressures may only be safely used up to 1000°C
- The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tub
|