1250C Small Box Furnace (6" x 6" x 7", 4.2 liter) with Programmable Controller - KSL-1200X-J-UL

0.0/5 rating (0 votes)

Description

SPECIFICATIONS:

Structure	High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency.  Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.  Doble layer steel case with forced-air cooling to ensure lower safer face temperature. One venting port is built on the top of the furnace One air inlet is located at the back of the furnace.
Chamber Dimensions	150mm(W) x 155mm(H) x 180mm(D), (6" x 6"x 7") Capacity: 4.2 Liter or 0.44 cubic ft
Power	Voltage:  208 -240V Single Phase 50/60 Hz 2.5KW (not suitable for running at 110V) Note: Power cable included but without a plug. Please install a plug on your own or click the link below the picture to choose a plug according to your country or your lab requirement
Operating Temp Range	1250°C  < 1 hour 100-1200°C continuously
Stability at 1000 °C	+/- 1.0 ° C
Uniformity at 1000 °C	+/- 2.0 °C
Max. Heating Rate	30°C/ min.
Thermal Couples	K types with Ceramic Sheath
Temperature Controller	The digital temperature controller is included. Proportional–integral–derivative control (PID control) and auto-tune function 30 segments programmed with ramping, cooling, and dwelling steps Built-in over-temperature alarm and thermocouple failure alarm +/- 1 ºC temperature control accuracy Default DB9 PC communication port
Temperature controller (optional)	MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detailed information about the MTS02-Y software kit.  Eurotherm temperature controller with +/- 0.1oC accuracy is available at the extra cost
Net Weight	62 lbs
Shipping Weight	115 lbs
Shipping Dimension	40"x30"x36"
Overall Dimensions	360mm(L) x 300mm(W) x 510mm(H)
Warranty	One year limited warranty with lifetime support.   ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.
Operation Video
Application Notes	For the longer service life of the furnace, we recommend the heating rate not to exceed 10 °C /min. The cooling rate should not exceed 10 °C /min either. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with the alumina coating  The heating module is easy to replace. Click pic left to order spare the Heating module for replacement If firing material release vapor or smoking, please put the furnace into a fume hood as left 2 pictures.
Note	Toxic, corrosive or explosive gases are not allowed for use with this furnace. You may consider the furnace with a separated controller to use in a glovebox  or remote distance  (click Pic. 1 to order )  If you need to open a hole on the top of the furnace ( Pic. 2), please let us know.   The furnace can be modified into a hybrid tube furnace (Pic. 3) Pic. 1            Pic. 2     Pic. 3