| Power Input | 9KW |
| Working Voltage | AC220V Single-phase 50/60Hz ( 50 A breaker required) |
| Max. Working Temperature | 1500°C 《 1 hours |
| Continuously Working Temperature | 1400°C |
| Recommend Heating rate | 5°C/min. |
| Processing Tube | Material: Mullite tube
Size: 82 O.D x 73 I.D x 1200mm L
 |
| Heat Zone Length | - Three heating zones: 200 mm / each (Included 20 mm spacing)
- Total heating zone length: 600 mm
- Constant Temperature Zone length: 350mm (If set 3 zone at same temperature) +/- 2ºC.
- Accept processing tube up to 100 mm diameter
|
| Temp. Profile at 1450ºC 84mm O.D Tube |  (click to enlarge) |
| Overall Dimensions | 915 mmL × 660 mmW × 762 mmH |
Temperature Controllers
  | - PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- Built-in overheating & broken thermocouple protection.
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Three S-type thermocouples (one for each zone).
- RS485 Communications Port.
- Optional:
- The furnace may be operated by PC by installing a control module. Please order an MTS-02 control module at extra cost.
- If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems. For more information please click here.
  
|
European Temperature Controllers (optional upgrade)
 | - 1 heating channel
- 1 program of 8 or 24 segment
- Alarm Relay: Form 'A' and Form ‘C’ built-in
- Digital Communications: RS485
- Temperature Accuracy: ± 0.1ºC
- Recipes: Using a PC tool recipes can be created that can be used to change the operating parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set.
|
| Laptop, software & WiFi Control(Optional) | - Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial)
- Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipe, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost (up to $1,000).
- Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
| Vacuum Level | - 10E-2 torr by quality mechanical vacuum pump
- 10-5 torr by molecular pump
|
| Thermal Block Placement | - Two thermal blacks are included. Please click the picture below to learn how to place them inside tube
- You may order flange support to avoid tube rotating ( click Pic below right )
 .jpg) |
| Heating Elements & Thermal couples | - 24 pcs 1500ºC grade Silicon carbide rod (14mm Dia. x 150mm heating x 413mm length)
- The heating element is consumable, Please click the picture below to order spare and replacement.
- 3 pcs S type thermal couple built-in
 |
| Net Weight | 160 Kg |
| Shipping Weight & Dimensions | 465 lbs; 52" x 40" x 46" |
| Application Notes | - The tube furnaces with mullite tube are designed for use under vacuum and low pressure < 0.02 Mpa
- Never use graphite crucible and the alumina tube.
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.
- The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
- Vacuum pressures may only be safely used up to 1300°C for all mullite tube furnaces:
- Customized long heating zone up to 1200 mm L with 700 mm uniform temperature zone ( +/- 5°C) , and 1800mm mullite tube is available upon request; ( click the picture below to see sketch)
 5 zones   6 zones |
| Operation Instructions |  |
| Warranty | - One year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.).
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
| Compliance | - CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
-
      |
