Furnace Structure
 | - Double layer steel structure with air cooling to keep case temperature < 65oC
- Vertical and splittable for easy installation.
- Water cooling flange with recirculating water chiller
- The crucible that hangs inside tube can be rotated under vacuum by DC moter under vacuum or controlled atmorsphrer.
- The crucible can be lift manually to make sample change at easy ( after open flange )
|
Power | 5.5 KW |
Voltage | AC 208-240V Single Phase, 50/60 Hz |
Max. Temperaturee | 1500oC < 30 minutes |
Continuous Temperature | 1400oC < continuous |
Max. Heating Rate | <= 10oC /min |
Heatig Element | - 1500C grade SiC---12 pcs
 ( click thumb to order spare tube ) |
Tube Size and Materials | - Mullite tube made in the USA
- OD:84 mm x ID 72:mm x Length: 1393 mm ( included )
 ( click thumb to order spare tube ) |
Heating Zone | - Heating Zone length: 440mm
- Constant Temperature： 150 mm （ within+/- 1oC)
|
Temperature Controllers | - 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
- Over temperature protection and alarm allows for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Five K-type thermocouples (one for each zone).
- RS485 Communications Port.
- PC controlled software and interface module are included
  
|
| Vacuum Seal Flange | - One pair of 80 mm water cold stainless steel flanges with vacuum gauge and valves included
- One 16 L/m recirculating water chiller is included
|
Vacuum Level | - 10-3 torr by mechanical pump （ click picture below to order separately )
- 10-5 by turbopump
  |
Heating Element | Fe-Cr-Al Alloy doped by Mo |
Power Cable & Plug | - 10 feet length 10-3 AWG heavy duty UL approved power cable is included. Extra length cable can be ordered by click picture below-left
- The plug is not included. Browse our catalog for compatible plugs or obtain one from a local hardware store.
  |
Dimension | 660L × 400 W × 1450 H ( mm )inner if |
Net Weight | about 85Kg (excluding mobile cart) |
Shipping weight | 500lbs |
Warranty | |
Laptop, software & WiFi Control (Optional) | - Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters operating range.
- Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
- Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Compliance | - CE Certified
- All electric components ( >24V) are UL / MET / CSA certified
- The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. （ please click marks below to learn details )
     |
Application Notes 
Click here to learn more about the installation of a gas regulator
| - The tube furnaces with mullite tube are designed for using under vacuum and low pressure < 0.02 Mpa / 0.2 Bar/ 3 PSI
- Never use graphite crucible in alumina tube.
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.
- The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
- Vacuum limit definition for all mullite tube furnaces: * Vacuum pressures may only be safely used up to 1300°C
|
Operation Instructions | |
