1600C Horizontal Flash Sintering Furnace with 3KW Programmable Power Source - GSL-1600X-FS3KW

Name: 1600C Horizontal Flash Sintering Furnace with 3KW Programmable Power Source - GSL-1600X-FS3KW
Brand: Premier Solutions Pte. Ltd

0.0/5 rating (0 votes)

Description

GSL-1600X-FS3KW is a horizontal tube furnace with 3KW programmable AC power source designed for exploring the flash- sintering for ceramic materials at a lower cost. The tube furnace comes with 80mm OD alumina tube and a sliding sample fixture, which can preheat sample up to 1600oC. The Sample holder will press electric wire to the sample via ceramic screw to pass through programmable AC power source which is programmable up to 1500W power.
Flash-sintering is an new technology which is used widely in the research of solid state electrolyte, SOFC and fero-magnetic & Thermo-electric materials.

SPECIFICATIONS:

Tube Furnace	208 - 240 VAC, 50/60Hz, 5.2 KW max. power consumption Working temperature: 1600°C continuous and 1700°C Max. Heating Zone length: 18" ( 457 mm ) Constant temperature zone: 6" ( 150 mm) within +/- 1°C One pcs of High purity Alumina tube with dimension: 2 3/8"x 40"(60OD x 54IDx 1000mm L is included The alumina tube is consumable and no warranty covered. Pls click the picture to order spare
Temperature Control	PID automatic control via solid state relay with 30 steps programmable and +/-1°C accuracy Built-in Over Temperature and Thermocouple Failure Protection B-type thermal couple Optional: You may upgrade the controller to the Eurotherm 3000 Series Temperature Controller with +/-0.1ºC accuracy. This package includes communication cable (RS485- USB) and software. Click the pic left to view the spec. Eurotherm 3000 Series optional
Vacuum Sealing Flanges & Sample Fixture	Vacuum Flanges are made of stainless steel which can reach the vacuum to 10-2 torr by mechanical pump and 10-5 torr by turbo pump. Left Side Flange: 30 mm dia. quatz observation window Needle valve with 1/4 NSP connector Right Side Flange： KF25 vacuum port to connect to a vacuum pump Two electric wires feedthrough. Wires are made of Platinium with 1 mm diameter Needle valve with machanical vacuum guage. Sample fixture is built-in the inside flange. This flange is slidable to make sample loading easy.
Programmable AC Power Source	The programmable AC power source is to connect the electric wire at the feedthrough at the right side flange. After pre-heating, AC power will pass a sample as programa setting to produce more heat rapindly, which results in sample sintered in high density. The power parameters can be set via included labtop. Power source specifcations ae as the below Input Voltage: AC220V±10%, 50/60Hz， single phase Power Capacity: 3000 W Max. Circuit Type: IGBT, PWM Output Voltage： 50V-300V adjustable with ≤1% stability Output Frequency: 50/60Hz fixed with ≤0.01% stability Protection: Overload, over temperature , and short circus PC programmable： Labtop with pre-installed software is included for program setting Optional : DC power source 400V/10A is available upon request at the extra cost
Optional Parts	Anti-Corrosive digital Gauge up to 10E-5 torr is optional for CVD application (Pic 3) You may order multi-channel gas delivery system for DVD or CVD operation ( Pic 4)
Dimensions & Weight	1950L×500 W ×720 H, mm 150Kg
Warranty	One year limited warranty with lifetime support (Consumable parts such as tubes and o-rings are not covered by the warranty)
Compliance	CE Certified NRTL (UL61010) or CSA certification is available upon request at extra cost.( pls click marks below to learn details )
Operation Video and Instructions
Application Notes	Please click link below for the article on flash-sintering preocessing A simple flash sintering setup under applied mechanical stress and controlled atmosphere