1600°C Bottom Loading Furnace w/ Sliding Baffle Door for Thermal Cycling Test - VBF-1600X-D2

Features

• Automatic bottom loading for easy operation
• Horizontal sliding baffle door for blocking thermal radiation
• Programmable temperature control up to 1600ºC with 24 segments
• Automatic thermal shock cycling is programmable up to 100 times
• • Close the baffle door to preheat the chamber, then loading the sample for fast heating
  • Open the baffle door to down-loading sample, then, close the door, and air blow the sample for fast cooling

Power

• Single-phase 220 VAC, 50/60Hz (20 A breaker required)
• 9 KW Max. 
• 10-foot power cable is included, but without a plug

Working Temperature

• MoSiO2 heating elements
• 800°C - 1600°C continuously
• Recommended heating rate: ≤10°C/min ( 800 - 1400°C ) and < 5°C /min ( 1400 - 1600°C)

Bottom Load and Baffle Door
 

• The bottom loading stage is driven by an electric motor, which has a 276 mm diameter and 20 kg max. loading weight
• The sliding baffle door is driven by a DC motor 

• Touch screen control panel for controlling temperature and thermal shock cycling
• Temperature control
  • Eurotherm Temperature Controller inside
  • 1 program, 24 segments programmed with ramping, cooling, and dwelling steps
  • Built-in PID automatic control, Auto-Tune function with overheating & broken thermocouple protection
  • +/- 0.1 ºC temperature accuracy
  • B-type thermal couple
• Thermal shock cycling automatically via a program, as below
  • Preheating chamber when close the baffle door 
  • Open baffle door, loading sample to the top chamber for fast heating at an ideal time
  • Open baffle door, loading heated sample down, then blow it by cooling fans
  • Repeat the above procedure by setting cycling time
• RS485 port is built-in for PC operation  ( software is included )

Overall Dimensions

Click the picture to see the details

Net Weight

500 kg

Warranty

• One-year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.)
• ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty

Compliance

• CE Certified
• NRTL / CSA Certification is available upon request at an extra cost

Operation Demo Video &  Instructions