Options
| OTF-1600X-60
| OTF-1600X-80
|
Alumina Tube | (click underlined for specs) | O.D: 80 x I.D:74 mm x L 1000 mm
(click underlined for specs) |
| Furnace Structure | Double-layer steel casing with air cooling to keep furnace surface temperature lower than 60°C. High purity fibrous alumina insulation for Max. Energy-saving. The special refractory coating on the furnace inner and heating element to increase furnace life. Two fibrous ceramic tube blocks are included for blocking heat radiation from the inside tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating) |
| Input Voltage | 208 - 240VAC SINGLE PHASE, 50/60Hz |
| Power | 6.0 KW |
| Heating Temperatures | - Max. Heating temperature: 1600°C (N2 or other inert gas must be filled inside the tube to resist deformation)
- Continuously heating temperature: 1550°C ( without Vacuum)
- Continuously heating temperature: 1500°C ( under vacuum)
- Heating rate: 10°C /min Max.
|
| Heating Zone | - Total heating zone length: 390mm
- Constant temperature zone: 160mm (+/-1°C）
|
Heating Elements
 | |
Temperature Controller
 | - FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 / PC communication port
- MET Certified
|
Temperature controller (optional)  | - MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software package.
- You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is entirely compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm 3004 temperature controller.
|
| Vacuum Sealing |     |
| Vacuum Levels | - 10^-2 torr by the mechanical vacuum pump.
- 10^-5 torr by a molecular pump.
- Leak rate < 5 mtorr / min.
  The vacuum pump is not included; please order separately at related products section |
| Power Cable & Plug | - 10 feet length 10-3 AWG heavy duty UL approved power cable is included. Extra length cable can be ordered by click picture below-left
- The plug is not included. Browse our catalog for compatible plugs or obtain one from a local hardware store.
  |
| Product Dimensions |  610 L ×470 W × 755H, mm |
| Net Weight | 30 Kg |
| Shipping Dimensions | 45 x 45 x 35 inch |
| Shipping Weight | 250 0lbs |
| Warranty | One year limited manufacturer's warranty (consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty, please order replacements at related products below). |
| Laptop, software & WiFi Control (Optional) | - Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables users to edit temperature profile, manage heat-treatment recipes, record, and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost (up to $1,000).
- Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Compliance
 | - CE Certified
- NRTLor CSA certification is available at extra cost.
|
| Application Notes | |
Warnings
Click here to learn more about the installation of a gas regulator | - The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.02 MPa
- Never use graphite crucible an alumina tube.
- Attention: A two-stage pressure regulator must be installed on a gas cylinder to limit the-the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.
- .The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
- Vacuum pressures may only be safely used up to 1500°C
|
| Operation Instructions |  ( Heating element installation )  |
610 L ×470 W × 755H, mm
