(+65) 6284 3818



1650C Vacuum Induction Zone Melting System for Directional Solidification - EQ-SKJ-ZM1650

0.0/5 rating (0 votes)


EQ-SKJ-ZM1650 is a 1650°C maximum zone melting furnace system for directional solidification of metal purification.  It can be used for single crystal growth with the crystal top seed loading.    Key Features:
1. Vacuum Induction Zone Melting for metallic material
2. Vacuum sealed quartz tube chamber sample loading;
3. Induction coil traveling by servo motor. Specifications:

Advanced Features
  • Maximum temperature: 1650 ºC 
  • Vacuum or Atmosphere controlled
  • Induction coil traveling distance: Max. 300 mm
  • Applications: melt purification, directional solidification, or  single crystal growth for metallic material
  • Voltage: AC 220 V, Three Phases
  • 50/60Hz
  • 15 KW
PLC Control
  • Touch Screen, User-Friendly
  • Parameters: Induction coil and crucible position, Moving speed, Induction power by percentage, Temperature
Working Temperature 
  • Induction Heating with 15 KW power supply
  • Maximum Working Temperature: 1650°C ( <1hr)
  • Frequency: 30 - 80 KHz
  • Digital Temperature control:  +/- 2ºC
Tube and Flange
  • 2" O.D. High purity quartz tube ( smaller tube is available upon request )
  • Top stainless steel flange with KF 25 vacuum connection port, mechanical pressure gauge, over-pressure relief valve
  • Bottom stainless steel flange with the gas delivery port and 1/4" Feedthrough for the thermal couple
  • Graphite crucible 40 mm O.D x 60 mm H with the Boron Nitride Liner
  • One thermal couple on the bottom of the crucible for temperature control
Coil Traveling Mechanism
  • Maximum traveling distance of coil: 150 mm
  • Servo motor controlled
  • High speed: 0 - 200 mm/min
  • Slow speed for single crystal growth: 1 - 50 mm/hr
  • The speed mode can be customized with extra cost
Water Chiller
  • Temperature range: 5 - 30°C
  • Water Flow Rate: 16 L/min
  • Water Tank: 12 Liters made of stainless steel
  • Note: It is recommended to use a specific coolant to get the best performance.
Vacuum Pump (Not included)
  • 10E-2 torr via dual-stage mechanical vacuum pump (bottom right picture)
  • 10E-5 torr via Turbopump (bottom left picture)
  • The vacuum pump is optional. Please click here to choose a vacuum pump.
  • CE certified
  • NRTL certification is available upon request at $5000 extra
  • One-Year limited warranty with lifetime support
  • 600 mm L X 500 mm W X 800 mm H
Net Weight
  • 75 kg
  • 165 lbs
Shipping Weight & Dimensions
  • 350 lbs, 49x41x58"
Installation Video
 Application note
  •  In order to zone melting for metallic materials, you may make a solid rod sample from powder before zone melting via CIP as the link below

Share this product

Enquiry Form

Please type your full name.
Invalid email address.
Invalid Input
Invalid Input

Register for new product information:    

Please publish modules in offcanvas position.