(+65) 6284 3818



1700C Max. Compact Tube Furnace (60mm OD) with Complete Accessory - GSL-1700X-S60-UL

0.0/5 rating (0 votes)


GSL-1700X-S60-UL is TUV standard compact tube furnace and ready to pass UL/CSA certificates. This furnace has a 60 mm Dia. alumina processing tube with vacuum flanges. The max. heating temperature is 1700ºC. The temperature controller is 30 segments programmable high precision SCR (Silicon Controlled Rectifier) digital controller with the accuracy of +/-1ºC.  It is widely used in material & chemical researching labs to sinter all types of new material samples under vacuum and other gas conditions. 
Working Temperature
  • 1650ºC continuous
  • Max: 1700ºC < 3 hour
Heating Elements
Furnace Structure
  • Double-layer steel casing with air cooling.
  • Two cooling fans inside to keep the case temperature < 60oC.
  • High purity Alumina refractory chamber with max energy saving.
  • Alumina tube, vacuum flange, gauge & valves are included.
  • Compact design (click picture on the left to see dimensions)
  • The compact furnace can be placed on the 600x600mm mobile cart (available in the optional parts).
Power Consumption Max. 3KW
Input Voltage Single Phase, 220V AC,  50/60 Hz (30A breaker required)
Max. Heating / Cooling Rate 10ºC / min
Heating Zone 125mm 
Constant Temperature Zone 50  within ± 3º C at 1500oC
Tube Materials High purity Al2O3 ceramic, Purity > 99.5%
Temperature Controller
  • FA-YD518P-AG temperature controller is included.
  • Proportional–integral–derivative control (PID control) and auto-tune function
  • 30 segments programmed with ramping, cooling and dwelling steps
  • Built-in over-temperature alarm and thermocouple failure alarm
  • +/- 1 ºC temperature control accuracy
  • Default DB9 PC communication port
The temperature controller
Eurotherm 3000 Series optional
Processing Tube
  • Premier Grade alumina tube.
  • 51 mm (I.D) x 60 mm (O.D) x 800 mm length.
  • Four fibrous ceramic tube blocks are included for blocking heat radiation from the inside tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating).
  • For 60mm tubes, it is recommended that customers purchase two pairs of tube support to prevent the tube from bending under high temperature (please click on the last picture to order).
              Click here to choose crucible
Sealing Flanges
  • One pair sealing flange with double silicone high-temperature O-ring is included.  
  • Two SS needle valves and one dial vacuum gauge are installed with a flange for immediate use. 
  • Vacuum pressure can reach 50 mTorr by a quality mechanical vacuum pump and 10^-5 torr by turbo molecular pump. Please click the picture below to see the flange assembling details. 
Fitting Ports                        
Vacuum Level
  • Limited by the vacuum pump
    • 50 mtorr can be achieved by the mechanical pump
    • 10^-5 torr can be reached by molecular pump
  •  The vacuum pump is not included, please order separately by clicking here
Pressure Measurement / Monitoring
  • Mechanical Vacuum Gauge (included as standard accessory). This mechanical vacuum gauge measures within a pressure range of -0.1 to 0.15Mpa.  
  • Digital Pressure Gauge is optional: A gas-type independent (above 10mbar) digital vacuum gauge with a wide range between 3.8x10-5 to 1125 Torr. Aside from greater measurement precision, this gauge reduces the risks of chamber explosions caused by the incorrect reading of gas pressures due to gas type dependency.                         
Power Cable & Plug
  • 10 feet length 10-3 AWG heavy duty UL approved power cable is included. Extra length cable can be ordered by click picture below-left
  • The plug is not included. Browse our catalog for compatible plugs 
Dimensions 445 L x 380 W x 615 H  mm
Net Weight 235 lbs
Shipping Dimensions 48" x 40" x 45"
Shipping Weight 275 lbs
Warranty One year limited manufacturer warranty with lifetime support (consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below).
Laptop, software & WiFi Control (Optional)
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipe, record and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters of operating range.
  • The above features are available upon request at an extra cost (up to $1,000). 
  • CE Certified.
  • NRTL (UL61010) or CSA certification is available upon request at extra cost(please click marks below to learn details)
Application Notes
Operation Instructions                                  

Share this product

Please type your full name.
Invalid Input
Invalid Input
Invalid Input
Invalid email address.
Invalid Input
Invalid Input
Invalid Input
Invalid Input

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.