Furnace Structure | - High purity alumina fiber chamber with ZrO2 coating to ensure continuous temperature at 1700°C (up to 1750°C Max)
- Double layer steel structure with air cooling fan to keep case temperature low
- Gas inlet and venting port are installed for using at riched oxygen or inert gas atmospheres ( Not Airtight sealed)
- Drop down door design for easy sample loading
    |
Dimensions | - Chamber: 120 x 120 x 120mm ( 4.7"x 4.7" x 4.7"), 1.7 Liters
- Overall: 380 x 410 x 620 mm (15" x 16" x 24.5")
|
Power | |
Voltage | AC 208V-240V single phase, 50/60 Hz (20A air breaker required) |
Standard Working Temperature | 1720oC (continuous) |
Maximum Working Temperature | 1750°C(< 2 hours) |
Heating Rate | 0 ~20°C / min (suggestion =< 10°C) |
Temperature Accuracy | +/- 1oC |
Temperature Uniformity | +/- 2°C over 80 mm (3") @ 1700°C |
Heating Elements | Kathal Super 1800 grade MoSi2 heating elements ( 4 pcs ) for long service life and without evaporation at high temperature |
Thermocouple | B-Type (Pt-Rh to Pt-Rh)with Alumina tube |
Temperature Controller
 | - FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
- MET Certified
|
Temperature controller (optional)  | - MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller.
|
Laptop, software & WiFi Control(Optional)
  | - Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters operating range.
- Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
|
Power Cable & Plug
 (click pic to order plugs) | 10 feet length 14-3 AWG heavy duty UL approved power cable is included The plug is not included. You can order from your local hardware store according to female plug in your lab, or order from link left(30A plug |
Net Weight | 50 kg |
Shipping Weight | 80 kg (180 lbs) |
Shipping Dimensions | 480x480x790 mm |
Warranty | - One year limited warranty with lifetime support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.)
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
| Compliance | - CE Certified
- The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. （ please click marks below to learn details )
|
| Application Notes | - For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.
- The cooling rate shall also not exceed 10 °C /min.
- This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
- Please click here to learn how to DIY gas purging system.
- The refractory block must be inserted before closing door.
|
Operation Instructions | 
 
|
