200°C Vertical Hot Rolling Press ( 4") w/ Asynchronous Rolling Speed & Pressure Display- MSK-HRP-22

MSK-5070-AC is a 180mm width ( 7.1 ") heavy-duty electric rolling press with 7.5 horsepower and variable speed, which is designed for rolling metallic material ( < Rc 50) up to 20 mm thickness, such as copper, stainless steel, Nickel alloy, etc.

SPECIFICATIONS:

Power / AC Converter	Input Voltage: 208- 240VAC Three Phase, 50/60Hz  5.5KW Three Phase Motor  ( 7.5 horsepower )
Rollers	Roller materials:    Hardening Cr12MoV  Roller size:             132 mm dia.  x 180 mm width   (~  5" Dia x 7" width ) Hardness:              HRC 60-62 Rolling thickness:   0.02 - 20 mm adjustable  Gap accuracy:  +/- 0.05 mm Min. thickness is dependent on the materials.  The below is based on our experience: Ag:   0.06 mm Au:   0.04 mm Sn:   0.02 mm Cu:   0.06 mm
Rolling Speed	0 - 8  mm / second adjustable via  Frequency control with constant output power. The speed control unit is in separate box
Overall Dimensions	1020 mm(L) x 730 mm (W) x 1400 mm (H)
Net Weight	900kg
Shipping Weight & Dimensions	2250 lbs 48" x 45" x 66"
Compliance	CE Certified NRTL certification is available upon request at the extra cost.
Warranty	One year limited warranty and lifetime technical support Rust and damage to the two rollers due to improper storage condition or maintenance are not covered by warranty
Operation Video & Instructions
Application Note	Never roll materials with hardness > 50HRC The thickness of each time pressing is depending on material thickness.  The harder material shall be less press thickness, which customers shall test by themselves for the best parameters For some material that is easy work hardening, you may need to anneal it by furnace after each rolling.