200C 8" Width Heated Rolling Press with Variable Speed (Ar Gas Compatible) - MSK-HRP-04

Name: 200C 8" Width Heated Rolling Press with Variable Speed (Ar Gas Compatible) - MSK-HRP-04
Brand: Premier Solutions Pte. Ltd

0.0/5 rating (0 votes)

Description

MSK-HRP-04 is a desktop Heated Rolling Press with two independent temperature controllers up to Max. 200℃ working temperature, which is designed for preparing the thin electrode for flexible battery, and any soft materials, and can be used under Ar gas safely. (Warning: is not suitable for RC > 45 materials)

SPECIFICATIONS:

Effective Cylinder Width	200 mm
Roller Material & Size	High strength hardening steel with hardness with RC > 52 The Roller surface is plated by Cr for anti-corrosive Size: 96 mm Dia. x 220mm W Note: The benchtop rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers.
Roller Gap	0~1.2 mm adjustable Note: The gap tolerance may vary with temperature raising as below RT-100°C: 0.008 - 0.01 mm 100 - 150°C: 0.02 - 0.03 mm 150 - 200°C: 0.03 - 0.05 mm
Dial Gauge Accuracy	0.01mm
Minimum Thickness	Depending on the electrode's material and thickness, typically: A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm
Heating Temperature	Two digital temperature controller with 30 segments programmable for control two rollers separately 200°C maximum. Recommended Heating Rate: 1.3°C/minute Two heating elements are installed Power of each Heating Element: 1000W Temperature Control Accuracy: +/-5°C Below is a diagram of the Heating Elements.
Power	AC 208 - 240V Single phase, 50/60Hz Notice: 220V AC Power plug is not included. Please click here to order the plug (You may order a 3000W transformer to use it at 110V, click here to order) 2000W max. in total
Motor	High torque motor with reducing gear, which can run under Ar gas safely Rated power 100W Digital speed Display: 0~26 mm/s
Roll to Roll System (Optional)	For 200 mm width Roll to Roll, please consider below R2R device (click picture 1-2 & video to order) Vertical position rolling can be customized as requested at extra cost. Please refer picture 4 below Pic. 1Pic. 2 Video Pic. 4
Dimensions	620mm(L) x 280mm(W) x 370mm(H) Shipping Dimensions: 40" x 30" x 25" (D x W x H)
Weight	100kg
Shipping Weight	200 lb
Compliance & Warranty	CE Certified MET certificate is available upon request at extra cost. One year limited warranty with lifetime support Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Operation Instruction Video
Article	Please refer to this instruction on how to calculate rolling pressure from roller gap (reference only) Analysis of geometric and electrochemical characteristics of lithium cobalt oxide electrode with different packing densities
Warnings	Do not touch the surface of the rolling part of the machine when the rollers are heated up or running. Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by EQ-TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared with sheet original thickness. Never calendering decrement over 0.02mm comparing with original sheet thickness each calendering. Never roll materials with hardness > 45HRC Clean roller surface for each rolling and Use acetone to clean and lubricate when not use to avoid corrosion It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).