Structure
| - Roller size: 140mm width x 96mm Dia ( dual rollers), made of hardened steel (HRC > 58) with Cr electroplated coating
- Rollers can be heated up to 200°C with a digital temperature controller within +/- 1°C
- Rolling precision on thickness is < 0.002 mm
- Rolling Speed Adjustable (0 - 50 mm/ second)
- Dual digital micrometer for accurate thickness adjustment in the range 0 - 3 mm
- Touch screen control for speed and temperature
- Separated control unit from the rolling for operating inside the glovebox and saving space.
- Special DC motor designed for operating in the Ar gas atmosphere.
|
| Rolling Gap & Pressure | |
| Temperature of Rollers | - Two rollers can be heated 200°C with a digital temperature controller within +/- 1°C
|
| Rolling Speed | - 0 ~ 50 mm/ second (Rolling Speed Adjustable)
- Forward, Stop, and backward switchable
- Digital controlled with constant power output
|
| Rolling Width& Thickness | - Thickness： 0.005- 2.50 mm
- Thickness accuracy: +/- 2 microns
- Width： 135 mm Max.
|
| Surface Hardness of Rollers | - HRC ≥ 58
- Never roll materials with hardness > 50HRC
- Note: The benchtop rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers.
|
| Digital Micrometer | - Range: 0 - 3mm adjustable
- Resolution: 0.001mm (or 0.0001in)
- Unit interchangeable (mm / in)
- Zeroing
- Power supply: CR2032 3V Li-battery
- Operating temperature: 0 ~ 40°C
|
| Control Panel | - Color touch screen panel for setting temperature and speed
- Temperature accuracy: +/- 1oC
|
| Working Voltage
| - AC 110 or 220V single phase, 50/60H selectable
- 1700W output
- 20A breaker if 110V and 10A breaker if 220V.
|
| Optional Roll to Roll System
(Please select from the options bar) | MSK-H2150E-R2R is a roll to roll system integrated with the rolling machine at extra cost to enable the automatic film unwinding -> winding after calendering. Please click underline to view product details.
  |
Overall Dimensions
 | Rolling Press: 440mm(L) x 390mm (W) x 590mm(H)
Control Box: 480mm(L) x 280mm(W) x 250mm(H) |
| Net Weight | 80kg |
| Shipping Weight & Dimensions | 250 lbs, 40"x30"x26" |
| Compliance | - CE Certified
- NRTL or CSA certification is available upon request at the extra cost
 |
| Warranty | - One year limited with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
| Application Notes | - The MSK-H2150E rollers are specially designed for battery R&D in terms of its advantages as affordable, compact, and precise. Please strictly follow the instructions to operate
- Must use acetone to clean rollers' surface after each use
- If the machine will be idle for a long period of time, please apply anti-rust lubricant on the rollers
- To use this rolling press outside of a glove box, it is recommended to set the press right side up. (Pic.1). To use this rolling press in a glove box, it is recommended to lie down the press, the sample substrate can be fed from the top and received on the bottom. (Pic. 2)
- If you would like to put a control box outside the glove box, a KF 40 feedthrough may be needed at the extra cost. Please let us know in advance.
 (Pic.1)  (Pic.2) |
| Warnings | - Never roll materials with hardness > 50HRC
- Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm comparing with sheet original thickness.
- Never calendering decrement over 0.02mm comparing with original sheet thickness each calendering.
- Must clean roller surface for each rolling and Use acetone to clean and lubricate when not in use to avoid corrosion
|
| Operation Video
| 
 |
