Description
YLJ-HP60-LD (updated from YLJ-HP-6T-LD) is 200°C Max. compact lamination hot press consists of 6 metric ton hydraulic press with two heated platens (120x120mm area). The temperatures of the heated platens are controlled by a digital temperature controller up to 200°C. The hot press is designed for preparing electrode & electrolyte of solid and flexible lithium battery.
SPECIFICATIONS:
Feature | |
Heated Platen | - Platen Area: 120mm x 120mm
- Made of Aluminium alloy with the inserted heating element
- Warning: Please don't press a small area die directly against the soft Aluminium alloy surface. You may add a hard steel plate on top and bottom if press a small diameter die
|
Max. Working Temperature | - 200°C Max. (<30 minutes)
- 100°C continuous
|
Temperature Control | - The single set point digital controller is installed in the control cabinet
- Temperature accuracy ±1°C
|
Max. Working Pressure | - 6 Metric Ton (Note: the machine base must be secured to an unmovable & solid table before operation)
|
Max. Opening | - ~2 inches between two heating plates
|
Gauge Pressure Value to Force Conversion | Gauge Displayed Pressure Value (Mpa) | 12.5 | 25 | 37.5 | 43 | Actual Force Applied on the Hydraulic Cylinder (Ton) | 1.75 | 3.5 | 5.25 | 6 | - Notes:
- The actual force applied to the Hydraulic Cylinder (Ton) is equal to the force applied to your working piece
- For calculating the actual pressure (MPa) applied to your working piece, please follow the equations below:
- P = T/(πr^2) x g x 10
- P: Pressure (MPa) applied to your working piece
- T: Force (Ton) applied to the Hydraulic Cylinder
- g: Standard gravity. g ≈ 9.8 m/s2
- π: ~3.14
- r: Radius (cm) of the working piece
- *1 Metric Ton = 1000 kg; 1 MPa ≈ 10 kg/cm2
|
Power Requirement | - 110VAC or 220VAC +/-10%, 50/60Hz, single-phase (please select the voltage in the selection bar)
- 1200 W max,15A circuit breaker is required
|
Option | - Upgrade to Digital Pressure Gauge (100Kp to 30Mp) with $600 extra (Pic.1 & 2)
- We may install a digital load cell between the hot plate and hydraulic cylinder ( click Pic. 3 & 4 to order)
Pic. 1 Pic. 2 Pic. 3 Pic. 4 |
Compliance | - CE Certified
- UL / CSA Certification is available upon request at extra cost
|
Machine Dimensions | |
Shipping Dimensions | |
Shipping Weight | |
Operation Instructions | |
Warranty | - One-year limited standard warranty (Extended warranty is available for up to 5 years at an extra cost)
- Please note that small pores (<1.5 mm dia) may appear at the surface of the platens due to the process of die-casting aluminum, which is not covered by the warranty.
|