200°C Max Electric Roll to Plate Hot Press (220 mm Width, Ar Gas Compatible) - MSK-HRP-300

• 220VAC±10%, 50/60 Hz, Single Phase
• 2500W

• High strength refractory steel with hardness RC > 58 
  
• The Roller surface is plated with Cr for anti-corrosive
• Roller Size: 96 mm Dia. x 220mm W  (4" D x 8"W)
• Suggested rolling width:  150 mm
• Roll line speed: 0~ 50 mm/s adjustable
• Heating power: 1200W 
• Max. the temperature for the roller: 200°C
• Driving by DC motor and Ar gas compatible 

Roller Gap ( Thickness )

• 0~ 1.8 mm adjustable

Dial Gauge Accuracy
(Thickness Indicating )

• Dual digital micrometer heads
• Accuracy: +/-  0.005mm

Movable Hot Plate

• The hot plate is made of High strength refractory steel with hardness RC > 58 
• Dimension:  220 mm W x 300 mm L
• The Hot plate is movable by the hot roller via friction force
• Max. working temperature:  300 oC
• Max. Rolling width on the plate:  150mm

• Two digital temperature controllers for control hot roller and hot plate separately
• 200°C suggested, and 300°C maximum
• Max Heating Rate: 4°C/minute
• Power of Heating Elements: 2500W in total
• Temperature Control Accuracy: +/-3°C

Power

Motor (Ar Gas Glove Box Compatible)

• High torque 24VDC motor with reducing gear (1:75) 
• Motor power: 40W
• Rolling speed adjustable: 5~45 r/min
• Digital controlled with constant output power 

Output Thickness

• Depending on the electrode's material and thickness, typically:
  • A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of  0.1 mm
  • A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
  • A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm
• Thickness uniformity: +/- 2 microns if  coating electrode thickness +/- 5 micron and each rolling increased < 10 microns

Weight

140kg

• CE Certified
• NRTL or CSA certification is available upon request at extra cost
• One year limited warranty with lifetime support
• Rusting and damage due to improper storage conditions or maintenance are not covered by a warranty

• Do not touch the surface of the rolling part of the machine when the rollers are heated up or running
• You may calibrate the temperature by EQ-TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
• Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared with the sheet's original thickness