4 Channel Tube Furnace (50mm Alumina Tube, 1500C Max) for Hi-Throughout Annealing - GSL-1500X-MGI-4

• The furnace is consistent with four-tube furnace modules with alumina tube 50 OD x 460 L, mm 
• Each heating module's temperature is controlled independently up to 1500°C
• Quickly sealed flange,  Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas
• Processing 4 samples with different temperature at compact space 

• MoSi2  

Working Temperature &
Constant Temperature Zone

• Continuous Working Temperature 1400°C
• Maximum Working Temperature 1500°C (< 1 hrs)

• High purity alumina tube with   Φ50X L 460 mm, 4 tubes included
• 4 flowmeters are included 
• The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves
• Max. Vacuum  10^-5 torr by a turbopump
• Only one vacuum pump required via a KF25 port.  Click the picture below to choose a vacuum pump
•    

• Eurotherm 3000 Series Programmable Temperature Controller
• Includes over-temperature and broken thermal couple alert.
• 4 channel heating tube is controlled independently by 24 segments programmable temperature controller
  
• 4 S type Thermal Couple
• Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.

Heating Rate

•  10  °C/ min Max.    

Temperature Accuracy

• +/- 0.5°C

Power &  Working Voltage

• 12 KW, 208 - 240V single phase,  50/60Hz  ( if 4 heating modules operation at the same time )
• Three-phase, AC 380V - 460V available upon request.
• Note： Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.

• CE Certified
•  NRTL (UL61010)  or CSA certification  is available upon request at extra cost.

Dimension 

Warranty

Operation Instruction

Warning &
Application note