Structure
  | - Five sides heating ( left, right, front, back, and bottom ) to achieve more uniform temperature zone.
- One SiC sheet is placed on the bottom of the chamber ( top of the heating element ) to support heavy sample load up to 100 kg.
- Double temperature controller to ensure furnace never overshoot
- Thermal efficient ceramic (high purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency.
- Heavy-duty double-layer structure with the cooling fan to keep furnace exteriors safe to touch.
- Built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace.
|
| Chamber Dimensions | - 16 " x 16'' x 16'' （D x H x W） (400 L × 400 W × 400 mm H)
- Capacity：64 liters/ 4100 cubic-inches/ 2.37 cubic ft
|
Power
 | - 8800 Watts
- Note： Power cable included but without the plug. Please install a plug by your own or click the link left the picture to choose a plug according to your country or your lab requirement
|
| Current Rating | |
| Voltage | - AC 208 - 240 Single phase, 50/50Hz
|
Operating Temp Range | - 100-1100°C-Max continuously
- 1200°C-Max under an hour
- Note: for using =>1000°C, the furnace block must be placed front chamber.
|
Stability at 1000oC | |
Uniformity at 1000oC | - +/- 1°C within 250 × 250 × 250mm central zone
- +/- 1.5°C within 300 × 300 × 300mm central zone
|
Max. Heating Rate | |
Temperature Controller
 | - FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
- MET Certified
|
Optional +/- 0.1ºC Controller
 | - MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW and provide +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
|
| Laptop, software & WiFi Control(Optional) | - Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters operating range.
- The above features are available upon request at an extra cost (up to $1,000).
- Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Gas Inlet and Outlet
 | 1/4'' Barbed Gas Inlet/Outlet is installed on the back of the furnace. |
| Overall Dimensions | 750 L × 800 W × 1070 mm H |
| Shipping Weight | 300 Lbs (shipping by pallet) |
| Warranty | - One-year limited warranty with lifetime support.
- ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
|
| Compliance | - CE Certified
- NRTL (UL61010) or CSA certification is available at extra cost.
     |
| Application Notes | - This furnace is a vacuum sealed furnace, toxic or explosive materials and gasses are not recommended for use with this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
 click here to choose a crucible |
| Operation Instructions |   |
