(+65) 6284 3818




Hot Plate Press

500°C or 750°C 24T Laminating Hot Press (135x135 mm) with Dual Temp. Controller - YLJ-HP100-XX

0.0/5 rating (0 votes)


YLJ-HP100XX  is a optional  500°C or 750°C Max. lamination hot press, which consists of a 24T hydraulic press with two heated platens. The temperatures of the heated platens are controlled by two digital temperature controllers separately. The platens ( 135 x 135 mm area) are made of hardened Cr12MoV or SS310 alloy with a flat surface. Water cooling jackets are installed with the heating platen that allows the heated plate to get faster cooling. One pressure gauge (300 kN) is also mounted to monitor the pressure applied on the platen. It is an excellent tool to prepare polymer and ceramic samples.

Hydraulic Press
  • Hydraulic pump and hydraulic cylinder are separated for easy replacement
  • Max. Force: 24T  
  • Manual operation
Max. Working Pressure
Gauge Displayed Pressure Value (MPa)  5    15    25      35   
Actual Force Applied on the Hydraulic Cylinder (Ton) 5.5   11.7  18.5 25.5
  • The actual force applied to the Hydraulic Cylinder (Ton) is equal to the force applied to your working piece
  • For calculating the actual pressure (MPa) applied to your working piece, please follow the equations below:
  • P = T/(πr^2) x g x 10
    • P: Pressure (MPa) applied to your working piece
    • T: Force (Ton) applied to the Hydraulic Cylinder 
    • g: Standard gravity. g ≈ 9.8 m/s2
    • π: ~3.14
    • r: Radius (cm) of the working piece
    • *1 Metric Ton = 1000 kg; 1 MPa ≈ 10 kgf/cm2 
Pressure Gauge
  • Measuring Accuracy is +/-1.25 kN
Heated Platen Area
  • Platen Area: 135 mm x 135 mm 
  • Material: Harden Cr12MoV alloy for 500°C version  ( SS310 for 750oC version)
  • Surface: Flattening with CNC grinding  
  • The parallelism between two plates:   < 0.05 mm within 10"x10" area
  • Plate surface roughness:      < 2 microns
Max. Travel Distance
  • 40 mm 
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (80 mm)
Max. Working Temperature
  • 450°C continuous with water cooling
  • 500°C for less than 30 minutes with water cooling
  • 750°C version is available upon request at extra cost. Please choose from the product option
Heating Rate & Cooling Rate
  • ≤ 5°C/min
Water Cooling Jacket
  • Two water cooling jackets are built on the back of the top and bottom heating plate separately with 1/4" water pipe connectors. Such a configuration allows you to cool the sample as soon as the hot pressing process is completed. 
  • Please consider using one recirculating water chiller to save water and protect the environment (order separately by clicking the picture below)
  • You may order the electric hydraulic pump for automatic pressure control. (Pic below )
Temperature Control
  • Two digital controllers are installed in one box with 30 segments programmable and auto-tune faction
  • Temperature accuracy ±2°C.
Power Requirement
  • 208 - 240 VAC, 50/60Hz, single phase
  • 2.5 kW max.
  • 15 A circuit breaker is required for 220 V, 5' length power cable included, but no plug
  • CE Certified for the whole furnace
  • NRTL (UL 61010) or CSA Certification is available upon request, additional charges will apply
Machine Dimensions Pictures
    Shipping Weight & Dimensions 400 lbs; 48" x 40" x 40"
    Operation Instructions   
  • The pressing machine was quality inspected in the USA, lifetime support is provided
  • One year limited standard warranty (Extended warranty is available up to 5 years at an extra cost)
 Application not This hot -press can be used inside glovebox with Ar and N2 gases

Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.