(+65) 6284 3818



6 Channel Tube Furnace (50mm Quartz Tube, 1200C Max) for Hi-Throughout Annealing - GSL-1200X-MGI-6

0.0/5 rating (0 votes)


GSL-1200X-MGI-6 is a six channels  50mm O.D. tube furnace for high throughout heat treatment of alloy and ceramic material up to 1200°C.  It is an excellent tool to research the phase diagram of new generation material.


Furnace Structure
  • The furnace is consistent with six-tube furnace modules with qurtz tube 50 OD x 460 L, mm 
  • Each heating module's temperature is controlled independently up to 1200°C
  • Quickly sealed flange,  Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas
  • Processing six batches of  samples with the different temperature at compact space 
Heating Element 
  • Ni-Cr-Al- resistance wire

Working Temperature 

  • Max.Working Temperature 1200°C
Processing Tube
  • High purity quartz tube with   Φ50X L 460 mm, 6 tubes included
  • 4 flowmeters are included 
  • The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves
  • Max. Vacuum  10^-5 torr by a turbopump
  • Only one vacuum pump required via a KF25 port.  Click the picture below to choose a vacuum pump
Temperature Control
  • Six digital Programmable Temperature Controllers built-in
  • Includes over-temperature and broken thermal couple alert.
  • 6 channel heating tube is controlled independently by 24 segments programmable temperature controller
  • 6 S type Thermal Couple
  • Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.

Heating Rate

  •  20  °C/ min Max.    

Temperature Accuracy

  • +/- 1.0 °C

Power &  Working Voltage

  • 10 KW, 208 - 240V single phase,  50/60Hz  ( if 6 heating modules operation at the same time )
  • Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
  • CE Certified
  •  NRTL (UL61010)  or CSA certification is available upon request at extra cost.


  1200 L x 680 W x 1000 H, mm  ( Pls click Pic to see details)


  • One year limited warranty with lifetime support
  • We reserve the right to upgrade the furnace structure for better performance without notice

Operation Instruction


Warning &
Application note


Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.