Induction Heater
 | - Working Voltage: 208~240V AC, 50/ 60Hz, Single Phase
- Working Current: 34 Amp (60A breaker required)
- Max. Input Power: 7 KW
- Output Frequency: 30 - 80 kHz Adjustable
- Duty Cycle: 80%
- Air Cooling: Rear Fan
- Protection: Automatic water pressure, over-temperature, and overload protection
- Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover
|
Temp. Controller & Thermocouple
 | - Working Voltage: 208~240V AC, Single Phase
- Automatic PID tunning for temperature control.
- 30 segments programmable for precise controls of heating rate, cooling rate* (won't get faster than natural cooling) and dwell time.
- Overheating & thermocouple failure protection.
- +/- 5 ºC temperature accuracy.
- Thermocouple: C type
- Continuous Working Temp. Range: 1000ºC~2000ºC
- Max. Heating Rate:
- 10ºC/second (1000ºC-1200ºC)
- 8ºC/second (1200ºC~1500ºC)
- 3ºC~6ºC/second (1500ºC~1700ºC)
|
Graphite Crucible & liners
  | - High Purity Graphite Crucible: 1.5"(OD) x 1.25"(ID) x 3.75"(Deep) Crucible is included for induction heating and metal melting.
- Max. Loading Capacity: Up to 1/2 of the total volume of the graphite crucible, ~35ml.
- Double-layers refractory liner: Graphite fiber sheet is a thermal insulator
- The crucible for melt infiltration is available upon request
|
| Sealing Flanges & Quartz Chamber | - Quartz Tube: Two-end Open Tube is included with dimensions of 100mm(OD) x 92mm(ID) x 365mm(L)
- Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and bard fitting. Please click the picture (bottom-right) to view the details.
- Bottom Flange: Stainless steel flange with needle valve and KF-25 vacuum port. Please click the picture (bottom-left) to view the details.
- KF25 right angle valve & clamps and 1 meter SS bellows are included for connecting to the vacuum pump
   |
Pressure Sensor
 | - Anti-Corrosive Capacitance Diaphragm Gauge, the measurement range is up to 3.8x10E-5 torr
- One 24V,1A DC power adapter is included and ready to use. The input voltage for the adapter is 110~240V.
|
Water Chiller
 | - Temperature range: 5 - 30°C
- Water Flow Rate: 16 L/min
- Water Tank: 12 Liters made of stainless steel
- Note: It is recommended to use a specific coolant to get the best performance.
|
| Vacuum Pump |   |
| Heavy Duty Mobile Cart | - Structure: Steel Frame Mobile Cart
- 600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange
|
| Product Dimensions | Induction Heater: 18.5"(L) x 12"(W) x 17"(H) (470mm x 300mm x 430mm) Water Chiller: 18"(L) x 18.7"(W) x 30"(H) (460mm x 475mm x 762mm) Heavy Duty Mobile Cart: 600mm(L) x 800mm(W) x 597mm(H) |
| Compliance | - NRTL Certification is available upon request at extra cost, please contact our sales representatives for a price quote.
- Certify standards include: 1) Induction heater: UL61010-1 & UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 & UL1995
|
| Warranty | - One year limited warranty with lifetime support
- Consumable parts such as processing tube, refractory liners, o-rings and heating coil are not covered by the warranty
|
| Operation Video |  |
Application Notes  Click here to learn more about the installation of a gas regulator. | - Please click here to learn the Fundamentals of Induction Heating
- The Induction heating system is designed for use under vacuum and low pressure < 0.02 MPa.
- Attention: A pressure regulator must be installed on your input gas tank ( click picture below to review ) and have the output gas pressure set below 3 PSI at all times after opening the gas tank with the gas maintained in a continuous flowing condition.
- Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the healing process
- The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
|
| Net Weight | 300 lbs |
| Shipping Weight | Total 550 lbs |
| Shipping Dimensions | Total 2 Pallets: #1: 48" x 40" x 41" #2: 48'x 40" x 43' |
