(+65) 6284 3818


8 Channel Battery & Supercapacitor Analyzer (5 mA - 12A up to 5V) w/ Laptop Software & Control Unit - BST8-12

8 Channel Battery & Supercapacitor Analyzer (5 mA - 12A up to 5V) w/ Laptop Software & Control Unit - BST8-12

0.0/5 rating (0 votes)


BST8-12 is an eight-channel battery and supercapacitor analyzer to analyze all kinds of batteries and supercapacitors from 5.0 mA to 12 A, up to 5V, with gold-plated pins for the best connection. Each channel of the analyzer has an independent constant-current and constant-voltage source, which can be programmed and controlled by computer software.
This system provides most applications in battery and supercapacitor testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing, Faraday's measurement and etc.
The purchase comes with a brand new laptop with Microsoft Windows 10 with 30 days free trial of Microsoft Excel and the latest version of controller software installed and calibrated for immediate use.


Electricity requirement

110V AC or 220V AC selectable for universal use
Power Consumption

826 W
Battery Testing Control Unit

Each battery and supercapacitor analyzer requires to connect one battery testing control unit.
One battery testing control unit could connect up to 10 battery-and-supercapacitor analyzers

Input Impedance


Three ranges of Max. current are built-in, and switchable on the device
The first range: 5.0 mA – 1 A; Minimum Current interval: 2 mA
The second range: 1 A - 6 A; Minimum Current interval: 12 mA
The third range: 6 A - 12 A; Minimum Current interval: 24 mA
Frequency: 10 Hz
Accuracy: ± 0.05% of F.S.

Range: 25 mV - 5 V programmable; Minimum Voltage interval: 10 mV
Frequency: 10 Hz
Accuracy: ± 0.05% of F.S.
Single Channel Output Power

60 W Maximum
Data register conditions

Response Time: <1ms
Time Range: 365 * 24 hours
Charging Modes

Constant Current Charging
Constant Voltage Charging
Constant Current & Voltage Charging
Constant Power Charging
Discharging Modes

Constant Current Discharging
Constant Voltage Discharging
Constant Current & Voltage Discharging
Constant Power Discharging
Constant Resistance Discharging
Measurement cycles

1 - 65,535 cycles
Product Dimensions

480mm(L) x 560mm(D) x 135mm(H)

Eight independent programmable channels
Each channel can set different working modes and functions independently
Programs & Software

The software (TC8.0) is included to set various working modes for measuring capacity and lifecycle for all types of rechargeable batteries
Working modes Include constant current discharge, constant current charge, constant voltage charge, constant resistance discharge, rest, cycles, etc.
Limited threshold conditions include voltage, current, time, capacity, negative voltage slope, etc.
With real-time monitoring windows and integrated graph/data windows, the testing process can be observed more directly and efficiently
During the test, the software will provide instructions and warnings for assistance
The calibration software can be used to calibrate the analyzer
MS Excel 2013 30 days free trial is pre-installed for you to output the Excel data file.
Test Reports and Curves for analysis

Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc)
Data reports are created by the software. User can easily compare the performance of the batteries tested in channels both visually and statistically
Protection and Auto-recover

If the power failure occurs during testing, the system will shut down all operating channels. Once power is recovered, the system will automatically resume those stopped channels and ensure that the test is normally conducted, so that no cases will lose any data.
Battery Holders

Two types of battery holders are included in the BST8-12 Standard package:
8 Gold Plated spring load holders with adjustable height for measuring cylinder or coin cell up to 70mm(H) (pls click a picture below 1-2 to enlarge)
8 alligator clips with cable for universal connecting (especially for pouch cell, pls click the picture 3-4 below ) Laptop Computer

Brand new laptop with MS Window 10, MS Excel 2013 30 days free trial is included and the latest version testing software is installed and calibrated for immediate use.
Notice: It is suggested to use an external hard drive to keep an instant backup of the collected data.

CE Certified
MET, TUV, CSA, UL certification are available upon request at extra cost

Two Year limited warranty with lifetime support for the battery analyzer. (Note: MTI does not carry a warranty for the Laptops. In case service is needed for the laptops, please contact laptop manufacturer directly for warranty/non-warranty service.)
Operation Manual & Video

Application Notes
New buyers must buy the software installed laptop to avoid trouble from installation. If you like to run multiple battery analyzers on one Laptop, you can just buy multiple analyzers with one laptop which are offered at a discounted price.
Warning: Please choose NEVER for Screen and Sleep off in Power& Sleep setting of your computer, or it may lose connection from the battery analyzer.
The customer can easily combine up to 10 battery analyzers (0.002-1mA, 0.1-10mA, 6mA-3000mA) to one computer by using a transit device.
You may order MTI's movable rack to organize the battery analyzers (click the first picture below for more information)
You may order an internal resistance tester to measure DC resistivity (click the second and third picture below for more information) Net Weight 11.5 kg (26 lbs)
Shipping Weight 18 kg (40 lbs) / Analyzer only: 25lbs
Shipping Dimensions 610mm(H) x 510mm(W) x 356mm(H) (24" x 20" x 14")

Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.