8 Channel Tube Furnace (20mm Quartz, 1200C Max) for Hi-Throughout Annealing - GSL-1200X-MGI-8

• The furnace consists of 8 small tube furnace modules with quartz tube 20mm O.D. x 17mm I.D. x 192mm L 
• Each heating module is separated by insulation material with air cooling layer, no temperature influence each other
• Each heating module's temperature is controlled independently up to 1200°C
• Quick seal flange, vacuum gauge, and flow meter are installed to allows heat treatment under vacuum or flowing gas
• Processing 8 samples with different temperature at compact space 
• The furnace system consists of two units: a furnace and a transformer box

• NiCrAl alloy wire

Working Temperature &
Constant Temperature Zone

• Continuous Working Temperature 1100°C
• Maximum Working Temperature 1200°C (< 1 hrs)
• Constant temperature zone:  
  • +/- 2°C within center 20 mm cubic zone
  • +/- 5°C within center 55 mm cubic zone
• 

• 8 High purity Quartz tube with 20mm O.D. x 17mm I.D. x 192mm L are included
• 8 Quickly clamped flange with 1/8 gas inlet and outlet, as well as vacuum ports are built in (see pic below)
• 16 needle valves are optional to connect to gas inlet and outlet for gas flow control
• 8 vacuum port in the back will be connected to vacuum pump via 8 to 1 adaptor
• Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
• Max. Vacuum 10^-2 torr by a mechanical pump and 10^-5 torr by turbopump
•             

• 8 channel heating tube is controlled independently by 30 segments programmable temperature controller
• 8 K type Thermal Couple
• PC control software is included, which can control 8 channel heaters by one Laptop

Heating Rate

• 10  °C/ min Max.    

Temperature Accuracy

• +/- 1°C

Power & Working Voltage

• 2.5 KW, 208 - 240V single phase, 50/60Hz (if 4 heating modules operation at the same time )
• Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug

Laptop, software & WiFi Control (Optional)

• Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) available at extra cost.
• Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
• A wireless remote control provides up to 300 meters operating range.
• Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
• Note: The software is only compatible with MTI’s Yudian Temperature Controller.
• 10 Channels furnace with PLC control is available upon request at the extra cost (Pic. right)
•         

• CE Certified
• NRTL (UL61010) or CSA certification is available at an extra cost

Dimension 

Warranty

Operation Instruction

Warning &
Application note