Phone

(+65) 6284 3818

Email

sales@premier-sols.com

Enquriy

8 Zone Split Tube Furnace For Thermal Gradient Processing upto 1500C - OTF-1500X-Z8

0.0/5 rating (0 votes)

Description

OTF-1500X-Z8  is an eight-zone tube furnace with a mullite tube and conventional flange working up to 1500°C.. Each SiC heating element is controlled by an independent temperature controller to create the various thermal gradient for special processing in material research, such as gradient functional material, high-through phase transition and re-crystallization, etc.

 

SPECIFICATIONS:

Power Input 9KW
Working Voltage  AC208 - 240V,  Single phase 50/60Hz ( 50 A breaker required)
Max. Working Temperature 1500°C
 Working Temperature 1400°C (Continuously)
Recommend Heating rate 5°C/min.
Processing Tube

Material:  Mullite Ceramic   Made in the USA
Size:   84 O.D x 73 I.D x 1219mm L 

Heat Zone Length
  • Eight heating zones:  50 mm / each  (Included 20 mm spacing)
  • Total heating zone length:  400 mm  
  • Constant Temperature Zone length:   300mm  (If set 8 zone at same temperature) +/- 2ºC.
  • Max. Tem[erature gradient:  100 °C/ cm  
  • Note:  Thermal gradient can be adjusted by inserting thermal insulation spacing element between each heat.  Please contact our technical support to learn how
Overall Dimensions 860 mm L × 380 mmW × 680 mmH
Temperature Controllers
  • 8 channels touch screen temperature controller for each heating element independently.
  • PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time in each channel
  • Over-temperature protection and alarm allow for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  • 8 pcs S-type thermocouples (one for each zone).
  • RS485 Communications Port to connect Laptop computer to show temperature profile.
Vacuum Level
  • 10E-2 torr by quality mechanical vacuum pump
  • 10-5 torr by molecular pump
Thermal Block Placement
  • Two thermal blacks are included. Please picture below to learn how to place them inside the tube
  • You may order flange support to avoid tube rotating ( click Pic below right )
   
Heating Elements &  T/C
Net Weight 110 Kg
Application Notes
  • The tube furnaces with mullite tubes are designed for use under vacuum and low pressure < 0.02 Mpa
  • Never use graphite crucible in alumina tube.
  • AttentionA two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.  Please click here to learn the installation of a gas regulator. 
  • The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
  •  Vacuum pressures may only be safely used up to 1300°C
Dimensions Furnace only: 35" × 23" × 30"
Operation Instructions
Warranty
  • One-year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.).  
  • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
Laptop, software & WiFi Control (Optional)
    
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters of operating range.
Compliance
  • CE Certified
  • NRTL or CSA certification is available at extra cost. ( pls click mark below to learn details 

Share this product

Please type your full name.
Invalid Input
Invalid Input
Invalid Input
Invalid email address.
Invalid Input
Invalid Input
Invalid Input
Invalid Input

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.