Phone

(+65) 6284 3818

Email

sales@premier-sols.com

Enquriy
High Speed 3D Ball Mill with Two Jars (80ml SS & Nylon, 2 Yrs Warranty) -- MSK-SFM-3

High Speed 3D Ball Mill with Two Jars (80ml SS & Nylon, 2 Yrs Warranty) -- MSK-SFM-3

0.0/5 rating (0 votes)

Description

MSK-SFM-3 is a compact high-speed ball mill with the 3D movement for making the small quantity of samples at easy and fast. It has higher impact energy created by rotation, vibration, and oscillation with frequency up to 1200RPM with a two-year warranty. The MSK-SFM-3 can be used in either dry or wet methods to mill materials and mix all kinds of solids, suspended liquids, and pastes with different sizes and materials. Two milling jars (SS and Nylon) are included for the use of most of the materials. It is an ideal choice to make small quantity samples in material and chemical research laboratories.
SPECIFICATIONS:

Features
  • 1200 max. RPM allows efficient pulverization and homogenization
  • The range of jar materials (Nylon, Alumina, SS, and Agate) offered for various applications
  • Easy jar installation 
  • Optional for variable speed and forced chilling air cooler
Standard Milling Jars & Media
(Two Milling Jars are included)
  • One 80 ml Nylon Jar with a set of Zirconia milling balls (4 pcs of 11.5 mm, 10 pcs of 10 mm and 10 pcs of 8mm) are included. It is suitable for grinding / milling the materials with minimized contamination .  
  • One 80 ml Stainless Steel Jar with a set of SS balls (20 pcs) are included for achieving a finer particle size.            Attention: Don't use  SS jar with ceramic balls.
Power Input
Oscillation Frequency
  • 1,200 RPM  (Please see the video below for a performance of the jar rotation)
  • Estimated acceleration gravity:  ~ 70 G.
  • Note: 1500 RPM version is available upon request at extra cost, which provides > 100G force.
Timing Range      
  • 0 to 30 minutes for built-in mechanical timer
  • Warning: Running time for the mill should be less than 30 minutes, otherwise the mill may overheat.
Feeding 
  • Volume: 1/3 of the capacity of the ball milling tank 
  • Feeding Granularity: <1mm 
Discharging Granularity 0.1 micron minimum for certain material ( Mainly ceramic material )
Note:  To achieve finer or desired particles via ball mill is a research project, which is depended on the material to be milled, grinding time and speed, combination of grinding jar and milling ball, etc.  It is the user's responsibility to find the best milling procedure based on the material.  Buyers are welcomed to MTI laboratory at California test before purchase.
Noise Level 87dBA (standing at 1ft with the machine lid open and SS milling balls in the jar)
Compliance
  • CE Certified
  • For NRTL or CSA certification, please choose MSK-SFM-3-II
Warranty
  • Two years limited warranty  for parts with lifetime technical support (after June 1, 2017)
  • Alumina jars are not covered by the warranty.
Operation Video          
Speed Controller
(optional)
  • Variable speed version (0 - 1200 RPM)by 3 phase motor and speed controller is available. Click the pictures below for details and please select "with speed controller" from the options bar when purchasing.
  •                 
Optional Air Cooling

 
Forced cold air  
  • If the user needs to force conditional air cooling for some ductile materials, please click to order a Portable Spot Air Cooling Conditioner, which will keep milling jar temperature low.( click picture left ).  It is a cost-effective way to achieve required particle sizes and production rates for heat-sensitive or tough-to-mill materials.
Air Cooling Conditioner Test with Nylon Jar  Zirconia Balls Milling 30 mins Milling 60mins
The temperature of the jar without Air Cooling  45°C 65°C
The temperature of the jar with Air Cooling 35°C 45°C
  • Optional jar and grinding balls are available in the product options bar.
  •                                                  
SS vacuum jar         50ml alumina jar               Alumina balls                80ml acrylic jar              Zirconia Jar                 
Application Notes
  • Attention: In order to achieve the best grinding effects, it is suggested to use milling balls with a diameter of less than 10mm for a 50ml alumina  jar
  • Tips for choosing proper jars and milling media for milling and grinding application:
    • SS mixing jar is suitable for grinding various metal materials
    • For milling the oxide material, please choose Nylon or alumina/zirconia jar and media
  • Please consider our SYU-3 Ultrasonic Filtration System for filtering the product.
  • DO NOT USE stainless steel balls in Alumina jars or vice versa to avoid contamination. 
  • Please use N2 gas if it operates inside of the glove-box, do not use Ar gas 
  • Bulk samples must be crushed before grinding. Please consider MTI Jaw crusher ( click pic below right )
  •                     
Overall Dimensions                                    
Mill: 386mm(L) x 517.5mm(W) x 283.5mm(H)                                     Speed Controller:    260mm(L) x 170mm(W) x 240mm(H)              
Net Weight 40 kg (88 lbs)
Shipping Dimensions 27"(L) x 23"(W) x 24"(H)
Shipping Weight 135 lbs

Share this product

Enquiry Form

Please type your full name.
Invalid email address.
Invalid Input
Invalid Input

Register for new product information:    

Please publish modules in offcanvas position.