Automatic Pressure Control Kit for MTI Glovebox or Tube Furnace - EQ-KJT-2V

KJT-2V is an automatic pressure control kit for MTI glovebox to keep the chamber at constant pressure from 90kPa to 108 kPa  ( 675 Torr to 810 Torr )

SPECIFICATIONS :

Model	KJT-2V-HN14 (for MTI VGB-1 or VGB-3)	KJT-2V-K25 (for MTI VGB-4A)
Working Voltage	110V AC ~ 220V AC	110V AC ~220V AC
Package Includes (KJT-2V-HN14 Structure) (KJT-2V-K25 Structure)	One pressure transducer with M14 Male Port:  90 - 320 KPa  with 0.5% accuracy One control box with digital pressure Display and controller Two Solenoid Valves Three 1/4"BSPP to 1/4" BSPP fittings One1/4 bspp & M14 T fitting Two 3/8" barbed fittings 110V power cable and plug 3 sets of PTFE o-rings Cannon connectors are pre-installed with transducer and solenoid valves as well as on the back of the control box.	One pressure transducer with M14 Male Port:  90 - 320 KPa  with 0.5% accuracy One control box with digital pressure Display and controller Two Solenoid Valves One 1/4"BSPP to 1/4" BSPP fittings Two KF25 to 1/4"BSPP fittings One1/4 bspp & M14 T fitting Two 3/8" barbed fittings 110V power cable and plug 3 sets of PTFE o-rings Cannon connectors are pre-installed with transducer and solenoid valves as well as on the back of the control box.
Installation Diagram	Note: The solenoid valve sets are designed to replace the on/off valve on the glovebox	Note: The solenoid valve sets are designed to be installed on the KF-25 port on the glovebox
Operation Procedures	Turn on the controller Hold the circle key for 3 seconds Set pressure low limit and high limit on the controller.
Back View of Controller
Dimensions of Controller	10" X 8" X 3.5"
Operation Video & Manual
Warranty	One year limited with lifetime support
Optional	You may order an extra tube fitting to replace the 3/8" barbed fitting for better gas inlet You may order an oilless pump for vacuuming