Model | 2" O.D. tube with a mechanical pressure gauge | (Optional) 1" O.D. tube with a mechanical pressure gauge |
Furnace Construction | - High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands (click the pic below -left to order spare tubes)
- Drop-down door for easy and safe sample loading and unloading
- Hybrid Furnace:
- One-end closed 2" quartz tube, a tube block, and a corresponding flange are included for tube furnace application.
- A thermal block is included to work as a muffle furnace.
- Mechanical Pressure gauge EQ-CM-GV is included for the pressure measurement
-
| - High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands
- Drop-down door for easy and safe sample loading and unloading (with a safety interlock if the door is open)
- Hybrid Furnace:
- A two-end open 1" quartz tube, a tube block, and corresponding flanges are included for the tube furnace application.
- The 1" quartz tube penetrates through both ends of the furnace
- Two thermal blocks are included to work as a standard muffle furnace.
- Mechanical Pressure gauge EQ-CM-GV is included for the pressure measurement
-
|
Quartz Tube | - 2" quartz tube: OD50 × ID43.5 × L230 mm
- One-end closed
| |
Flange Optional: Stainless steel flange with 1/4" gas inlet and thermocouple feedthrough | - Standard: vacuum sealing assembly with 1/4" gas inlet and outlet (Please see the picture on the left). Fittings can be replaced by tube fittings or a KF25 port at an extra cost.
| |
Chamber Size | - Size: 4"x4"x4" or 100x100x100 mm
- Capacity: 65 cubic-inch or 1 liter
- Click on the picture to see the chamber size
| |
Power | - 110V version: 950 W (Power cord is included)
- 220V version: 1.2KW (Power cord is not included)
|
Operating Temperature | - 1000°C max for an hour
- 900 °C for continuous operation
|
Max. Heating Rate | |
Temperature Controller | - PID automatic control and auto-tune function
- 30 programmable segments for precise control
- Built-in protection for the over-heating and broken thermocouple
- Large digital control panel (48 x 96 mm) for easy operation
- Temperature accuracy: +/- 1 °C
|
Heating Elements | - Fe-Cr-Al Alloy doped by Mo
|
Thermocouple | |
Optional | - Two 8 mm diameter barbed fittings (gas inlet and outlet) (see pic on the left) at the back of the furnace panelare available at extra cost ($99 for both connectors). Check the option box
- Note: Self-Installation is required. The open barb-holes and threaded holes will be ready
|
Overall Dimensions | - 250 x 305 x 350 mm (Without Flange)
- 250 x 450 x 410 mm (With Flange)
| |
Net Weight | |
Shipping Dimensions | |
Shipping Weight | |
Warranty | - One year limited warranty with lifetime support
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
Compliance | - CE Certified
- NRTL (UL61010) or CSA certification is available at extra cost. ( please click marks below to learn details )
|
Application Notes Pic. 1 | - With the small footprint, low weight, and low power requirement, it can be easily accommodated in a glove box and threat samples under protective gas. Please click pic.1~3 to see details
- For high vacuum application ( <1e-5 torr), please choose a quartz tube with CF flange as in picture 4
- Pic.2 Pic.3 Pic. 4
|
Warnings | - Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. Please put the furnace into fume hood for better safety (Click Pic.1)
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
|
Operation Video | |