Compact Jet Mill with Speed 50 - 500 g/hr - MSK- BPM-50-2

MSK-BPM-50 is a lab-scale jet mill for materials with various hardness and properties. It grinds materials such as ceramic, magnet, ferrite and metallic alloy into micron-scale powder (2-5 microns) with an output rate of 50 - 500g/hr.
The jet mill grinds with a high-speed jet of compressed air or inert gas to collide the particles with each other. It is capable of outputting particles with the right size while continue milling particles above the desired size. Therefore, the ground product comes in narrow size distribution and good uniformity. Particles are separated from the gas stream by cyclonic separation. SPECIFICATIONS

Working Power	100 - 240V AC, 50/60Hz 350 W
Required Air Pressure	Recommended 0.6 - 1.0 MPa Pressure Recommended gas consumption rate: 0.25 - 0.5 m3/ minute An air compressor is required but is NOT included. (Please order one from a local store )
Particle	Input: 100 - 200 mesh Output: 2 - 15 micron, 50-500g/hr  The output particle size is depended on material hardness and input particle size. Coarse particles may need 3-5 times milling to obtain the finest size.
Particle collecting	One output particle collecting bag is included for immediate use
Optional	A pre-crushing mat be needed to achieve finer particles during jet milling ( Click pic. 1  to order ) An optional sieve can be used to filter the sample to 100-200 mesh to meet the input requirements. Please click the picture (Pic,2)  to order the MSK-SYU-3 sieving system A lab-scale cyclone system may be connected to the jet mill  with a filter collect fine powder easily (Pic. 3-4)    Pic. 1     Pic. 2  Pic. 3Pic. 4
Mill Liner	High purity fully sintered alumina
Powder Feeder	Automatic powder feeder controlled by vibration frequency Frequency:    40-400Hz   adjustable
Net Weight	15 kg
Shipping Weight & Dimensions	80 lbs 40"x26"x28"
Dimensions	520 mm(L) x 350 mm(W) x 340 mm(H)
Warranty	One year limited warranty with lifetime technical support
Demo Video	Jet milling with filter bag       jet milling with cyclone