Phone

(+65) 6284 3818

Email

sales@premier-sols.com

Enquriy
Gas Driven Decrimper for Disassembling CR20XX Series Coin Cells, (Ar Gas Compatible ) - MSK-PN110-DS

Gas Driven Decrimper for Disassembling CR20XX Series Coin Cells, (Ar Gas Compatible ) - MSK-PN110-DS

0.0/5 rating (0 votes)

Description

MSK-PN110D-S is a compact crimper with the disassembling die set. The crimper is driven by compressed inert gas or air for various types of coin cells such as CR2016, CR2025, and CR2032. It provides more accurate pressure control to achieve high-quality crimping with better consistency, repeatability, and faster speed. Such a device is 1000 grade cleanroom compatible and it will satisfy the most demanding battery assembling environment. In contrast to the electric or hydraulic driven crimper, driven gas crimper is not going to contaminate the high purity glove box atmosphere if the crimper is driven by the corresponding glove box gas. Please browse our crimper for a crimping coin cell.
SPECIFICATIONS:
Compressed Gas and Force
  
  • Pressure Conversion Table (Notice the Load is not strictly linear to the Air Pressure):

Pressure (kg/cm2)

2

3

4

5

6

7

8

9

10

Compressed Air Pressure (MPa)

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

Crimping Load (kg)

160

280

390

500

620

740

850

970

1080

  • Operation Pressure of Gas: 0.7 ~ <1.0MPa (0.9 MPa is recommended. 1.0 MPa is strict maximum)
  • Avoid operation with no workpieces and/or overpressure to prevent damage to the die.
  • No any Electric part for safe operation
Output dimension
  • O.D + 0.15mm after crimping (Original O.D 19.96mm, then output is about 20.11mm)
Die Set Material
  • Hardened Steel
Die Set & Compatibility
  
  • Disassemblingdies for CR2016, CR2025 & CR2032 coin cells included
  • Optional: Disassembling dies for CR23XX, 24XX are available upon request, please contact us for details
  • Spare crimping dies ( CR20XX, CR1220, CR23XX, CR24XX) can be ordered separately by clicking the 2nd picture on the left.
Measurement Accuracy
  • ± 0.5%FS
Glove Box Compatibility
  • A KF40 glovebox Feedthrough Set (with the necessary connector to gas cylinder) is included for connecting an inert gas source to the crimper inside the glove box. The feedthrough set includes 
    • KF40 quick clamp feedthrough & a quick clamp.
    • 12mm O.D. tube to 8mm O.D. adapter is included
    • 3 Tube: 1.5m 8x5mm blue FR-PPR tube(Crimper gas inlet),  1.5mm 6x3mm blue FR-PPR tube(Crimper gas outlet),  2m 8x5mm clear PU tube(connect to the gas source).
    
Stroke Length 20mm
Gas Consumption 490ml/stroke
Clean Room Compatibility 1000 grade cleanroom compatible
Gas Inlet/Outlet

  • 6mm O.D tube fitting
  • Inert gas if use inside glovebox ( automatic pressure controlled glovebox )
  • compressive air if use outside glovebox.
Note:Air Compressor or Inert Gas Tank (0.7~1Mpa) are needed for the machine operation, please purchase separately  
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
Structure Heavy Duty Steel 
Product Dimensions  Click picture for detail.
Compliance
  • No Electric part inside the machine, so NRTL certification is not required
Warranty One Year limited warranty with lifetime support (Rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty)
Operation Video      
Application Notes
  • Maintenance: Electrolytes are highly corrosive materials. Crimping dies must be cleaned with ethanol after each use to avoid corrosion and deformation.
  • Please browse our crimper for crimping coin cell.
  • Do not use air compressor when operating the unit in the glove box. Otherwise, air can flow inside and cause contamination. Use high purity inert (Ar or N2) gas instead. 
  • To avoid damaging the machine, the gas pressure must be lower than 1.0MPa (10 bars or 145 PSI).
  • Please use MTI Branded Coin Cell Cases with our crimper. We don't guarantee the crimping quality if other brand cells are used.
Net Weight 40 kg 
Shipping Weight & Dimensions 100 lbs; 40"x30"x25"

Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.