Features | - High Throughput & Automatically Assembly in the dual size of glove-box with < 1 PPM O2 and H2O
- CR 2032 Coin Cell or Half Cell
- 8 Kinds of Anode
- 8 Kinds of Cathode
- 2 Kinds of Liquid Electrolyte
- Productivity: ~ 30 PPH
- Product Rate: 98%
- Tracking System
|
Flow Chart | - Top Case Loading
- Lithium Chip / Anode Loading
- Separator Loading
- Cathode Loading
- Spacers / Springs
- Electrolyte Injection
- Bottom Case Loading
- Pressure Control Electric Crimping
|
Voltage & Power | - AC 220V +/- 10%, 50 / 60 Hz, Three Phases
- Maximum Power: 2 kW
|
Utility Requirements | - Temperature: 25ºC +/- 3%, Humility: 30 - 90 RH%
- If without the glovebox, it requires the dry room with dewpoint below - 40ºC
- 0.5 - 0.8 MPa dry compressive gas
|
Battery Materials Requirements | - Cathode: 13 mm in diameter, 0.1 mm thickness
- Anode: 14 mm in diameter, 0.09 mm thickness
- Separator: 16.5 mm in diameter, 0.1 mm thickness
- Spring: 15.4 mm in diameter
- Spacer: 15.5 mm in diameter, 0.5 mm thickness
- Bottom case: 19.4 mm in diameter, 2.84 mm thickness
- Top case: 16.5 mm in diameter, 2.6 mm thickness
|
Modules
| - XYZ automatic working station, X 1100 mm * Y 800 mm * Z 200 mm
- Dual chambers glove box, four working positions
- Sample materials loading
- Electric crimping, pressure 50 - 80 kg/cm^2
- PLC digital control
|
Coin Cell Type | - CR 2032
- Any other coin cell size die set could be customized at the extra cost
|
Channels | - 8 x 8 layout
- 64 channels in total
|
Production Yield | |
Accuracy | - Assembly Deviation: +/- 0.5 mm
- Electrolyte Injection Accuracy: 0.5 uL
|
Dimensions & Net weight | - Main glove box chamber size: L 1400 mm x W 1200 mm x H 900 mm
- Dimensions of the system: L 3200 mm x W 1200 mm x H 900mm
- Net Weight: 1200 lbs
|
Optional
| - The number of cathodes, anodes, separators, and liquid electrolyte might be customized based on the demand
- The programmable PC control and software design might be customized upon request
- Any size of coin cell dies set could be customized at an extra cost
- The system can be built for dry room operation without a glovebox
|
Warranty | - One year limited by lifetime support
|
Compliance | - NRTL certification is available upon request at an extra cost
- MTI has granted the patent 201910865725.X and 201921549404.0 for this High Throughput Coin Cell Assembling System MSK-HTBA since September 2019.
|
Instruction Video | |
Optional | Pic. 1 Pic, 2
You may need hi-throughput round disc cutting (Pic. 1) You may consider our 128 channels battery analyzer for formation and capacity cycling ( Pic. 2) |