(+65) 6284 3818



Hybrid Film Coater w/ Both Slot Die & Doctor Blade 150 / 200 mm Width - MSK-AFA-HDS-150

0.0/5 rating (0 votes)


MSK-AFA-III-HDS-150 is an economic hybrid film coater with a vacuum chuck and bottom heater, which can make tape coating and slot-die coating via a special hybrid film applicator up to 320mm L x 100 - 150 mm W from 5 - 100 microns. . It is an excellent tool to research films of perovskitesolar cells, fuel cell proton exchange membrane, and the battery electrodes.


Working Power
  • 110 V or 208 - 240V AC selectable
  • 50/60Hz
  • 1000W
Film coater
  • Vacuum chuck made of Aluminum alloy with < 1.0 mm hole
    • Vacuum Chuck Dimensions: 200 mm(W) x 365 mm(L)  (8"W x 14"L)
    • The chuck is heated up to 120C by a digital temperature controller with +/- 1ºC accuracy
    • One vacuum pump is required, but not included please order separately.
  • One glass plate is included to coat slurry on a porous substrate, which can be sucked by vacuum chuck
    •                     (optional)
  • Moving Speed: One pushing bar is included for moving film applicator at speed  of  10 - 100 mm/sec variable
  • Moving Length: 10 - 350 mm adjustable by Adjustable Position Switch
Hybrid Coating Head

  • Film coating head consists of one fixed 150 mm width doctor blade and one 100 mm width removable slot die head ( click Pic. 1 below to see detail).
  • The gap between the coating blade and the substrate plate is adjustable with +/- 1-micron accuracy via dual digital micrometers. (Pic. 2)
    • Doctor blade: 150 mm width for minimum thickness of 0.010 mm film
    • Slot die: 100 mm width for minimum thickness of 0.005 mm film
    • Click the picture below right to order a spare slot die head with various width
   Pic. 1   Pic. 2   
 Digital Syringe Pump

  • Digital syringe pump with a easy to use control panel screen is included for slot-die coating
  • Holds small or big syringes up to 200 mL and remembers previous settings on power-up
  • Pumping rate: 1.963μL/min with a 10  μL syringe and 294.524mL/min with a 200mL syringe
  • The  movement speed of the plunger: 15cm/min (Max) 0.0001cm/min (Min)
  • Multiple operating modes: Infuse only, Withdraw only, Infuse/Withdraw, Withdraw/Infuse, Continuation
  • In order to achieve better coating by the slot die, slurry's  Viscosity and dispersion are very important. (Pic.1)
  • Please click picture 1 to order the Viscosity meter and dispersing machine (Pic. 2) and find the best parameter for your coating (Pic.2)
  • Two channels heatable syringe pump (Pic. 3)
  • Pic. 1 Pic. 2 Pic. 3
  • CE certified
  • NRTL or CSA certification is available upon request at an extra cost
  • One year limited warranty with lifetime support
Operation Video    (hybrid coating head)
Dimension & Net Weight    60 kg net weight
Shipping Dimensions 48"(L) x 40"(W) x 37"(H)
Shipping Weight 200 lbs

Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.