(+65) 6284 3818



Lab Scale Roll-to-Roll Flat Tape Casting System (Max. 350 mm Width) w/ Drying Heater - MSK-AFA-EC350

0.0/5 rating (0 votes)



MSK-AFA-EC350 is a 350mm width roll-to-roll tape caster with a 3meter long convection drying heater. Such a system integrates an electrostatic dust removal system which enables the particle-free coating environment. It can coat film sheets by slurry from 10  to 1000  microns thickness for various materials such as fuel cell membrane, battery electrodes, and biological films
   It also can add a hybrid slot die head or ultrasonic spray head to achieve slot-die coating and ultrasonic spray pyrolysis coating.
Note: {icture is for demo only and reserve right to change picture to meet customized specification SPECIFICATIONS


208 – 240VAC, 50/60Hz, Single phase
110VAC is available via a 3000W transformer.
Max. Power Consumption:  1.7 KW

Coating Method & Precision

  • Tape casting is done with a doctor blade ( Film applicator) on a flat plate: Substrate reeling out -> blade coating-> Bottom heating -convection drying-> and final electrode winding
  • Coating Thickness Precision: 10 microns.
  • Optional: Multiple doctor blade or hybrid slot-die is available at the extra cost.(Pic. 2)
  • Pic. 1        Pic. 2

Coating Width

  • Max. Coating Width: 350mm
  • Max. substrate width: 400mm 

Coating Speed

0~800mm / minute 

Coating Thickness

0~ 5mm adjustable

Max. Coating Length
  • Depending on the coating and substrate thickness. (Typically, you can get 4 meters of an electrode coated with 10um thick foil, 100um thick coating per run)

Rolling Diameter

160mm Max. (roller O.D is 63.5mm)

  • The bottom bed is made of Aluminium alloy, which enables up to  100°C Max via a digital temperature controller with +/-1ºC accuracy.
  • The Heating bed dimension:  2000mm long x  400 mm Width
  • The top cover has a transparent glass with a venting fan


     3000 (L) x 600mm (W) x 500mm (H)

Net Weight

400 kg 


  • CE Certified
  • NRTL (UL61010)  or CSA certification is available upon request at extra cost. 


  • One year limited warranty with lifetime support
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty (Please use Acetone to clean and dry the doctor blade, slurry feeder, and roller to avoid rusting)
Demo Video
  • Peristaltic Slurry Pump(Pic.1) can be used for delivery of slurry delivery during the coating process.
  • One set of ultrasonic spray heads can be added to the coater to achieve spraying coating  (Pic. 2)
  • The R2R coater may connect with the heated rolling machine with a pressure display (Pic. 3)
  •       Pic. 1         Pic. 2              Pic. 

Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.