Lithium Foil (0.02 mm thick x 80mm W x 5000 mm L) for Li-ion Battery R&D, 4g/bag - MF-Li0028

Lithium metal is widely used for Li-ion rechargeable battery R&D, Please click the link below to see a paper published in Nature Communication" which use MTI metal foil:     
High rate and stable cycling of lithium metal anode
by Jiangfeng Qian, Wesley A. Henderson, Wu Xu, Priyanka Bhattacharya, Mark Engelhard,， Oleg Borodin & Ji-Guang Zhang

Purity	99.9% Lithium
Melting Point	180.5 °C
Density	0.534 g/cm3
Color	Silver
Dimension	0.02mm thick x 80mm wide, roughly 5 meters long
Chemical Ingredients	lithium 99.9% sodium 0.020% potassium 0.005% calcium 0.020% iron 0.005% nitrogen 0.020% silicon 0.008% chlorine 0.006% aluminum 0.0050% nickel 0.0030% copper 0.0040% magnesium 0.010%
Net Weight	4g/bag
Sealing	sealed in Al bag with filled Ar
Use	Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).
Safety Data Sheet
Operation	The package must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM.   Never use N2 gases in the glovebox!!! No return or refund for misusing or wrong storage which causes The lithium foil oxidation
Notes	MTI does not accept international orders due to restrictions on hazard material exportation!!! MTI reserves the right to charge an additional handling fee due to special shipping/handling requirements. Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully. Lithium foil may be oxidized during handling and storage.  if you find any oxidation on the surface of the Li-foil,  please use a nylon brush/stainless steel scalpel to remove it before using it. If the Li metal is stored in mineral oil, please refer to this guide on How to clean mineral oil off Lithium metal using anhydrous Toluene If you would like to thinner foil,  please consider using the rolling machine by DIY