Micro-Vibration Mill with Zirconia Beads (Ar gas compatible) and 3" Agate Mortar - MSK-SFM-12M-A-LD

MSK-SFM-12M-A-LD is a high-energy Micro-Vibration Mill that sets the performance standard for small quantity milling and mixing up to 3 samples at 2 ml tube takes place (often within 45 seconds) inside the disposable 2ml screw cap microtubes. The optimized mixing motion causes rapid milling through constant high-velocity impact from the hardened YSZ micro-beads.  One 3"  agate mortar and pestle are included for grinding rough powder before milling,  MSK-SFM-12M-A-LD provides an economical alternative to the traditional, over-priced ball milling on the market today. (The ball mill can be used under Ar gas glovebox)

SPECIFICATIONS:

Working Voltage	110V AC 50/60Hz  For 220V AC please click here to order a transformer  24VDC motor driven and Ar gas compatible
Vibration Speed	2700 to 4000 rpm adjustable
Timer	0  to 3 minutes adjustable for each running Please allow the machine to cool and don't keep running without cooling
Capacity	3 x 2.0ml tube can be loaded on the device simultaneously
Tube	10 pcs PP tubes ( 2 ml ) are included. Tube size: 10.2 OD x 8.3 ID x 46.7 H,  (mm) Cap OD is 13mm  ( may grinding powder to < 5 μ) Thin wall stainless steel Micro-vials can be ordered by click Pic. 2        ( may grinding powder to < 1μ) Pic. 1   Pic. 2
Grinding media and Agate Mortar with Pestle	Five types of Pure High Impact Zirconia Beads are included for rapid milling Ø0.1mm, Ø0.5mm, Ø1mm, Ø1.5mm, Ø3mm Zirconia Beads, 5g for each. Extra zirconia balls are available upon request at extra cost One set of 3" Agate Mortar and Pestle is included for grinding rough powder before milling.
Particle distribution	Material dependent For alumina, 5-micron particles are achieved within 30 minutes.  Experiment Report - Ball Milling of LAGP Powder using MSK-SFM-12M-A  ( 500 nm for 30 minutes )
Dimensions	17 x 21 x 13.5 cm
Net Weight	5 lbs / 2.2kg
Warranty	Two years limited warranty with lifetime technical support
Operation Instructions
Application Notes	Instruction on Replacing Sample Holder The mixer can be placed into a glovebox and Ar gas compatible