NRTL Certified 25L 200C Vacuum Oven (12x12x11") with Digital Temperature Controller- DZF-6020-Series

DZF-6020-Series is a vacuum oven with a KF25 adapter and a leaking valve for venting. The maximum working temperature is 200°C. Max vacuum level can reach 10-5 torr at room temperature SPECIFICATIONS:

Model	DZF-6020-ETL-110	DZF-6020-CE-220
Chamber and Door	The chamber is structured with stainless steel and welded to bracing pieces The Inner Chamber size: 300 mm x 295 mm x 275 mm (12 x 12 x 11", 25 Liter, 0.91 cu-ft) A good vacuum sealing is achieved by the silicone gasket and the positive latch door The double layers observation window consists of 1/2" tempered glass and a transparent polycarbonate shield Two stainless steel shelves are included to facilitate process efficiency An adjustable leak valve for venting is included KF25 Port on the back of the oven for connecting with the vacuum pump
Vacuum Level	Ultimate pressure with the  240 L/m mechanical pump only: < 50 mTorr (at 200°C), 8 mTorr at R.T. after bake-out Ultimate pressure with 33 L/s turbopump: 5E-5 Torr (at R.T.), 1 mTorr at 200°C The vacuum pump is not included. Please order separately Double Stage Rotary Vane Vacuum Pump Recommended. Please click the pictures below to order the pump
Working Voltage	AC110V 50/60 Hz	AC220V 50/60Hz
Input Power	700 W
Working Temperature	RT+10 ~ 200°C for the continuous use
Temperature Controller	Single-point temperature setting Built-in over-temperature protection PID precise temperature control Temperature control accuracy: +/-1°C Temperature uniformity: +/-5°C @ 100°C, 25" Hg at center 6" x 6" area only
Fittings	KF25 port is built-in for connecting a vacuum pump
Standard Package	Barbed fitting to KF-25 Adapter, EQ-BARB-KF25, 1 set KF-25 Quick Clamp with Rubber O-Ring, 1 set I.D 10 mm Rubber Tubing, 1set
Optional Accessories	Please order KF-D25 Flexible Stainless Steel Vacuum Hose (Bellows), 1 meter at an extra cost Please order an extra KF-25 Quick Clamp with Rubber O-Ring KF-40 to KF 25 adapter is also available by clicking the left picture to order
Dimensions	Oven: 580 x 472 x 450 mm (L x W x H)
Shipping Weight & Dimensions	200 lbs  48" x 36" x 35"
Warranty	One Year Limited Manufacturer Warranty with Life-Time Support (Note: the silicone door gasket is not covered by warranty)
Compliance	NTRL (ETL) Certificated	CE Certificated
Operation Instruction
Application Notes	For accurate temperature measurement, you may do calibration by using the temperature calibrating kit For more information on how to calibrate the oven temperature, please review  How to calibrate the oven An optional 4-pin electric feedthrough could be installed in the oven at an extra cost, which provides a direct electric connection without breaking the vacuum. Please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for inquiries
Attention	It's normal that the SS chamber wall will be slightly deformed and lose its shiny surface during high-temperature operation under a vacuum. However, this would not affect any performance Please do not place the sample on the chamber bottom directly This product is not made by MTI but distributed for Shanghai Yiheng Manufacturer