Phone(+65) 6284 3818 | sales@premier-sols.com | Enquriy |
Precursor Powder of NCMOH622 for High Capacity NCM Cathode Powder 200g/bottle - EQ-Lib-Pre-NCM622
Description
Lib-PNCM622 is the precursor powder of NCMOH622 for High Capacity NCM Cathode Powder at your own composition.
There are 200 grams in one bottle
Note: You must mix the precursor with LiOH. H2O and calcine the mixed powder at 750- 790oC before use
Specification | |||
Package | 200g/bottle in a vacuumed bag | ||
Composition | NCMOH622 | ||
Configuration | Sphere | ||
Particle size distribution | D10：4.33 μm | ||
Specific surface area | 4.09 m^2/g | ||
Tap Density | ≥1.64 g/cm^3 | ||
Water Content | wt%＜0.36 | ||
PPH value | ~ 8.05 | ||
Mian Element | Required Content (mol) | Ratio (Ni:Co:Mn) | |
Li | 0 | 0 | |
Ni | 40.0528 | 6.503 | |
Co | 9.6601 | 1.569 | |
Mn | 11.8743 | 1.928 | |
Impurity | Required（ppm） | Typical（ppm） | |
Ca | ＜300 | 18 | |
Cu | ＜50 | 8 | |
Fe | ＜100 | 18 | |
Mg | ＜300 | 19 | |
Na | ＜500 | 232 | |
Zn | ＜100 | 102 | |
SO4 | ＜5000 | 3300 | |
Note | MTI does not manufacture this product, and only sell the small quantity to research for development for new generation battery. If you need a larger quantity or have a question for IP, we will forward your inquiry to the producer. | ||
Application Notes:
- Please click to see Procedure for Preparing Anode & Cathode Electrode Slurry.
- Please keep the powder in a vacuum box to avoid moisture.
- Please bake the powder in a vacuum oven at 120 - 150 °C before making slurry and coating to ensure max. capacity.
Register for new product information: