(+65) 6284 3818


Pressure Controlled Electric Rolling Machine (12

Pressure Controlled Electric Rolling Machine (12" W x 8"Dia.) for Battery Electrodes - MSK-E2300A

0.0/5 rating (0 votes)


MSK--E2300A is a precision electric calendar machine (rolling press) with a high-quality hydraulic pressure controllable system. It can prepare electrode sheets (current collector with the material coated on it) at consistent and repeatable rolling conditions.

    MTI has granted the patent 201720537817.1& 201720534495.5 for the Pressure Controlled Electric Rolling Machine MSK-E2300A since December 2017.



Working Voltage

Max. Power Consumption

  • 1.5KW

Rollers (One pair)

  • Dimensions: 200mm (Dia.) x 330mm (W)
  • Material: HRC 60 - 62
  • Effective Rolling Width: <250mm
  • Ra: 0.8 ~ 1.25um
Press Gap
  • 0.05 - 1mm adjustable by two-micrometer knobs
  • Tolerance: 0.003mm
Motor & Rolling Speed
  • 550W AC motor with frequency speed controller
  • Speed range: 1.0 - 3.0 Meter / Minute adjustable by Touch Screen Control Panel
Roller Surface Hardness
  • 60 - 62 HRC
  • Never roll materials with HRC >50

Press Planeness

  • ± 0.003mm

Pressure Control

  • Pressure load: 1 - 20T adjustable by touchscreen control
  • Digital pressure display shows set and real pressure force applied on the material

Compressed Air

>60 PSI required (Air compressor is not included, you may order one in the related product)

Attention: If a gas cylinder is used instead of an air compressor (pic2), a two-stage pressure regulator (pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator

    pic1                pic2


Product Dimensions

   1180mm (L) x 610 (W) x 930 (H)


CE certified
NRTL or CSA certification is available upon request at an extra cost


  • One-year limited warranty with lifetime support
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty

Operation Video


Application Notes

  • To avoid rusting, use acetone to clean and dry rollers' surfaces after each use
  • Apply anti-rust lubricant on the surface of rollers if the machine is unused for a long period of time
  • Never roll materials with hardness > HRC 50
  • In order to prolong the lifespan of the roller bearings, regular lubrication is recommended
  • Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared to the sheet original thickness
  • Clean roller surface for each rolling  and applies  lubricate when not in use to avoid corrosion

Net Weight


Shipping Weight & Dimension

1930 lbs; 55" x 40" x 47"

Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.