Phone

(+65) 6284 3818

Email

sales@premier-sols.com

Enquriy

Roll to Roll Coating System (Max. 250mm W) with 3 Optional Coating Heads - MSK-AFA-300-LD

0.0/5 rating (0 votes)

Description

MSK-AFA-300 is a Roll-to-Roll continuous coat with 3 optional coating heads for materials research labs.   
This system integrates the functions/ features of reeling in & out, slurry feeder, coating blade, baking oven, and final electrode winding (reeling in).
It can coat electrode sheets up to 250mm in width and 500 meters in length automatically. 
For Roll to Roll Coater Service, please fill out and submit the Roll to Roll Coating Service Request Form Note 1: MSK-AFA-E300-UL is updated from MSK-AFA-E300 with all UL certified electric parts from June 1, 2014, which are ready to pass UL or TUV test at extra cost. 
Note 2: Starting July 10th, 2015, the "Intermediate Coating" mode will be offered on all units as standard features.
Note3:  upgrade to three coating heads optional 

SPECIFICATIONS:

Power

  • 208 – 240VAC, 50/60Hz, Single phase
  • 3 KW  ( 30A Air breaker required )
3 Type of Coating Heads (Optional)   Please select the option bars to choose the coating head/method
  1. Reverse Comma Blade ( Transforming ) Pic. 1-3
  2. Micro-Gravure Coating (Pic. 4)
  3. Slot Die Coating: for coating thickness from 5μ to 300μ
    • 30 - 250 mm coating width is achieved by changing the shim size
    •  intermittent and grid coatings function are built-in
                      
   Pic. 1                         Pic. 2                   Pic. 3                        Pic. 4                         Pic. 5                    Pic. 6

Max. Coating Width

250mm

Thickness adjustable range

0 - 5mm

Coating thickness (after drying)

5 - 200um (for most kinds of battery electrode coating material)
Note: The dried coating thickness results vary depending on the physical property of the coating material.

Thickness Precision

± 3µm (± 5µm at edges)

Coating Speed

0-750 mm / minute 

Max. Drying Temperature

120°C
( Using a 240V transformer,  can reach 150°C max.)

Temperature Accuracy

±1°C

Heating Zone Length

710mm (28")

Reeling/Unreeling Shaft

  • 75mm (ID)
  • The alignment control is built-in with +/- 0.5 mm via an optical sensor.
  • The tension control:  20 - 80N adjustable

Max. Reeling/Unreeling Diameter

250mm (OD)

Max. Coating Length

  • Depending on the coating and substrate thickness.
  • Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run

Slurry Stirring

SS316 Moving Rod

Exhaust Port Size

127mm O.D

Control Panel

  • Touch screen control panel, which controls the slurry feeding rate, coating speed, and heating temperature.

Acessories included

 

Compressed Air

0.5-0.8 MPa Air compressor is required,  but not included. Please click here to order)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
  pic1                pic2

Optional Slurry Feeding Pumps

  • The Precision Peristaltic Slurry Feeding Pump for roll to roll continuous and intermediate coating process. ( Click Pic.1 in below to order )
  • 2 Liters Auto Slurry Feeder with Two Peristaltic Pump for continuous slurry delivery  (Click Pic.3 below to order)
  • You may order the Magnetic De-ironing Filtration system (Pic.4) for optimizing the battery electrode slurry condition before the coating process.
  •  Pic 1      Pic.2     Pic.3Pic.4

Optional 

  • You may order  Dual-Filtration System for NMP Vapor and connect it to the coating system for keeping environmentally healthy. Please click Pic.1 for details.
  • Atmosphere plasma cleaning add-on for the substrate is available upon request. Such a surface treatment will activate and increase the energy of the substrate surface and thus enables a better adhesion & bonding to the coating materials. Please click Pic.2~4 and Video.1 for more details. 

  Pic.1    Pic.2 Pic.3    Pic. 4    Video.1     

Product Dimensions

  1620mm ( L) x 950mm (W) x 1100mm (H)

Compliance

  • CE Certified
  • NRTL (UL61010)  or CSA certification is available upon request at extra cost.                   

Warranty

  • One-Year limited warranty with lifetime support
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Operation Video                                             
Reverse Comma Coating          Slot  Died CoaSting                    How to make Pouch Cell                 Howto Make Cylinder cell
Net Weight 1000 kg (2200 lbs)
Shipping Dimension 70" x 45" x 55"

Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.