Single Point Temperature Control Unit （PMWM） with PID for DIY Furnace - MTC1000

0.0/5 rating (0 votes)

PID temperature control unit is designed for precision control of high-temperature furnace from 500 - 1500 ^oC with heating elements of resistant wire or SiC.
Just connect the power cord and thermocouple with the unit, you can run your furnace automatically.
The controller uses PID via SSR power control with single segment.
The built-in "auto-tune" function allows you to adjust furnace temperature with minimum over-shooting.
Built in Protection to cut-off power for over-temperature.

Specifications:

Model	MTC1000-110	MTC1000-220
Input & Output Voltage	108 - 120 VAC, single phase, 50/60 Hz Output 110V	208 - 240 VAC, Single phase, 50/60 Hz Output 220V
Max. Power	1000 W
Thermo Couple Accepted	J, K, T, E, N, B, R, S,( thermo-couple is not included) J range: -310 to 1832 ^oF (-190 to 1000 ^oC) K range: -328 to 2502 ^oF (-200 to 1372 ^oC) T range: -328 to 752 ^oF (-200 to 400 ^oC) E range: -328 to 1832 ^oF (-200 to 1000 ^oC) N range: -328 to 2372 ^oF (-200 to 1300 ^oC) B range: 392 to 3272 ^oF (200 to 1800 ^oC) R range: 32 to 3214 ^oF (0 to 1768 ^oC) S range: 32 to 3214 ^oF (0 to 1768 ^oC) Please click picture below to order a thermal couple Thermal Couples (K, S, B type) & Calibration Kit
Temperature Control	The controller uses PID via SSR power control Single segments programmable. Control accuracy +/-1.0 ^oC
Overall Dimension (mm)	260 x 190 x 90 mm ( L x D x H)
Back View
Weight (kg/lbs)	2 kg
Certificate	CE recognized ( Controller alone ) NRTL or CSA certification is available upon request
Operation Instructions	Please click the link of How to use MTI furnace controller
Note	This temperature controller is designed for lab furnaces heated by resistant wire and SiC elements up to 1500^oC

Register for new product information:

Annealsys