Six-Zone Split Tube Furnace (Optional 2-4" Quartz Tube x 2 Meter L, 1200C Max.) - OTF-1200X-VI-2M-UL

Name: Six-Zone Split Tube Furnace (Optional 2-4" Quartz Tube x 2 Meter L, 1200C Max.) - OTF-1200X-VI-2M-UL
Brand: Premier Solutions Pte. Ltd

0.0/5 rating (0 votes)

Description

OTF-1200X-VI-2M-UL is a CE certified & UL Ready Six-zone & ultra-long split tube furnace with separated temperature control units and max working temperature of 1200oC . This six-zone furnace can create step thermal gradient or 60" ( 1500mm ) long constant heating zone by setting all the temperature controllers at same temperature. The furnace can accept processing tube with various O.D (1" to 4") at extra cost. Six 30-segment temperature controllers are built in a separate control box which allow PC software control of the furnace from a certain distance. It is an excellent furnace to handle various gases.

Specifications:

Furnace Structure	Double layer steel case High purity fibrous alumina insulation provides good energy saving. Heating Element : 1300 °C grade Fe-Cr-Al Alloy doped by Mo 80"length x 5.5"dia heating chamber with 6 built in thermal couples
Power & Voltage	AC 208-240V Single Phase, 50/60 Hz 13 KW Max. in total Each heating zone requires 2KW power supply Power cord is included without plug
Max. Temperature	1200 °C (<1 hour)
Continuous Temperature	1100 °C
Max. Heating Rate	<= 20 °C /min
Thermal Block Placement
Drawing
Heating Zone	Six independent heating zones: Each heating zone length 300 mm Total zone length: 2000 mm, or 80" in total ( including seperating ） Max. Constant temperature zone 60" ( 1525 mm ) if 6 zones are heated to the same temperature (within +/- 2 °C)
Temperature Controllers	Six PID automatic digital temperature controllers with 30 programmable segments for precise heating rate, cooling rate and dwell time control. Built in overheating & broken thermocouple protection. Over temperature protection and alarm are available. +/- 1 ºC temperature accuracy for each controller. Six K type thermocouples and one for each zone. With RS485 Communication port and MTS-02 control module, operators can utilize PC to control the furnace in distance (< 5 meter)
Tube & Flange	One 4" OD x3.62" ID x 100" L quartz tube and quick clamped flange One pair stainless steel vacuum flange is included with quick assembling flange ( a outside clamp for quick installation). Left flange with needle valve with 1/4" pipe port for gas inlet and one pressure gauge; Right flange with KF 25 port for vacuum pump connection as shown below The furnace can accept quartz or mullite tube with 1" - 4" diameter (Optional)
Dimensions	Furnace: L2800mm x W500mm x H950mm Temperature Controller: L700mm x W500mm x H1100 mm
Warranty	One year limited warranty for electrical parts. (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)
Compliance	CE Certified All electric components ( >24V) are UL / MET / CSA certified The furnace can pass TUV(UL61010) or CSA certification after minor modification at extra cost. Certification fee is charged separately. (please click marks below to learn details)
Operation Instructions
Shipping Weight & Dimension	Furnace: 1250 lbs; 114"x39"x52" Controller: 315 lbs; 48"x40"x56"
Optionals(click picture to order at extra cost)	Please click here t o order digital vacuum gauge for p r ecision vacuum control up to 10-4 torr If need hi gh vacuum > 10-5 torr, please order meliculor pump You may consider to order a recirculating water chiller for water cooling
Application Notes	How to set up ceramic tube and vacuum flange for MTI Tube furnace . In order to obtain accurate temperature inside tube furnace, you need to calibrate temperature by yourselves. Please click here to learn how.
Warning	Tube furnaces with quartz/mullite tube are designed for using under vacuum and low pressure <0.2 bar/ 3 psi/ 0.02MPa Attention: A two stage pressure regulator must be installed on gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. * Vacuum pressures may only be safely used up to 1500°C The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube