Three Zone Split Vertical Tube Furnace with 130mm Dia. Quartz Tube & SS Vacuum Flanges - OTF-1200X-VT-III-5

•  Double layer steel casing with air cooling to keep  case temperature > 55oC
• High quality fibrous insulation ( Made by Japan Company ) for Max. energy saving
              

Power

 7KW

 Voltage

 AC 208-240V Single Phase, 50/60 Hz

 Max. Temperature

 1200oC

 Continuous Temperature

 1100oC

 Max. Heating Rate

 <= 20oC /min

 Tube Size and Materials

 OD:130mm; ID: 120mm; Length: 1400mm (Quartz tube was included in the standard package)

 Heating Zone Length

• Three Heating Zones:each zone length is 300 mm
• Total Heatong zone length :  900mm
• Constant Heating Zone:        600 mm if  set 3 zone at  same temperature )

 Temperature Controller

• MET certified 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
• Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
• Over temperature  protection and alarm allows for operation without attendant(s).
• +/- 1 ºC temperature accuracy.
• RS485 Communications Port.

• Two stainless steel flanges with vacuum gauge and valves  included
• A hook ring is welded inside of the top flange for hanging sample or crucible by wire

          

• Standard 1/4‘’ Barbed fittings with needle valves.
• For supplying high-pressure gas, you may replace the standard barbed hose fitting with the 304SS 1/4" Swagelok® Tube Fitting, please click underlined to order.
• Optional: In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click the underlined to order.
• Optional: You may also consider using the parts in below to increase the vaccum effeciency 
  • Please click here to order digital vacuum gauge for precision vacuum control up to 10-4 torr (see picture below and click to enlarge)
  • You may click here to order flow-meter and install in tube flange (see picture below)
  • KF25 Stainless steel Bellows 
  • KF25 Quick Clamps

 Vacuum Level

 0.1torr (depends on the vacuum pump)

 Heating Elements

 Fe-Cr-Al Alloy doped by Mo

 Dimensions

 2130mm  (H) x 1505mm  (W) x 800mm  (L) install with mobile cart

 Net Weight

 about 80Kg (excluding mobile cart)

 Shipping Package Size After Crating

 65x45x50 inches

 Shipping weight

 450 lbs  

 Warranty

Laptop, software & WiFi Control (Optional)

• Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
• Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
• A wireless remote control provides up to 300 meters operating range.
• Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.

• Note: 
  The software is only compatible with MTI’s Yudian Temperature Controller     

 Compliance

Warning

Click here to learn the installation of a gas regulator

• In order to obtain accurate temperature inside tube furnace, you shall calibrate temperature before use, please click here to learn how.
• How to set up a ceramic tube and vacuum flange for MTI Tube furnace.
• Warning: The tube furnaces with quartz tube are designed for using under vacuum and low pressure < 0.2 bars / 3 psi / 0.02 MPa
•  The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
• Attention: A two stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
• Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C

Operation Instructions