Titanium Hydrothermal Reactor with Heater Option, 100ml, 400C @ 3MPa - GSL-1100X-Ti100

 

GSL-1100X-Ti100 is a mini reactor made of pure titanium metal. It can reach pressure up to 4 Mpa max. And it is an ideal tool for preparing advanced material, especially bio-material by the hydrothermal method.

Specifications:

Material	Made of high purity Titanium metal,  ( > 99.95% )
Reactor capacity & dimension	100 ml,     65mm OD x 50mm ID x 75mm height
Max. working temperature	RT -  400 °C Max
	Single-point  digital temperature controller with +/- 1ºC accuracy
Working Pressure	4 MPa Max.  < 200°C 3 MPa Max.   at 400°C
Valve	stainless steel needle valve with 1/4 pipe connector
Temperature Controller and Option	Single-point  digital temperature controller with +/- 1ºC accuracy Mechanical/Digital(30Mpa max) pressure meter and Temperature controlled heater options are available from the product option. For the Digital pressure meter, we pre-set the alarm before shipping at 3 MPa, please click to learn how to set alarm. Customized vessel size is available upon request at extra cost You may put this reactor on a magnetic stirring hot plate to make the magnetic driver. ( please see video below )
Compliance	CE Certified
Operation Manual
Attention	Due to the high-pressure gas output from the gas cylinder, it is necessary to install the gas pressure regulator with it to reduce the output pressure, avoid overpressurizing the furnace chamber and ensure a safe operation. Click here to learn the installation of a gas regulator Warning:   For your safety,  the high-pressure vessel must be placed inside an explosive-proof box or case during use under high pressure.  Never face on top flange without protection to avoid the accident.   Please click the picture and drawing below left  to see detailed structure, and click pic right to order an Explosion-Proof Box
Application Note	For RC-Ti100-S110/220 the default alarm AL1 setting is 3 MPa.AL1 (Alarm1) will stop the heating program when the pressure reaches an alarm setting. Hold ‘▲’ , ‘▼’ for 5 seconds allows entering set ‘AL1’ AL2 (Alarm2) is not connected.