| Power Input | 9.0 K W |
| Working Voltage | AC220V Single-phase 50/60Hz ( 60 A breaker required) |
| Max. Working Temperature | 1600°C ≤1 hour |
| Continuously Working Temperature | 1500°C |
| Recommend Heating rate | 5°C/min. |
| Processing Tube | Alumina Tube Size: 82 O.D x 73 I.D x 1000mm L
 click the picture to order spare  click here to choose a crucible |
| Heat Zone Length | - Three heating zones: 200 mm / each ( included 20 mm spacing )
- Total zone length: 600 mm
- Constant Temperature Zone length: 350mm ( if set 3 zone at same temperature ) +/- 2ºC.
- Accept processing tube up to 100 mm diameter
|
| Temp. Profile at 1450ºC |  (click to enlarge) |
| Overall Dimensions | 860 mm × 380 mmW × 680 mmH |
Temperature Controller
Temperature controller interface
The optional PC control module
Optional Eurotherm 3204 | Standard temperature controller:
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- Three S-type thermocouples.
- +/- 1ºC temperature control accuracy
- Default DB9 PC communication port (PC control module and software are sold separately. See optional.
Optional:
|
European Temperature Controllers (optional upgrade)
 | - 1 heating channel
- 1 program of 8 or 24 segment
- Alarm Relay: Form 'A' and Form ‘C’ built-in
- Digital Communications: RS485
- Temperature Accuracy: ± 0.1ºC
- Recipes: Using a PC tool recipes can be created that can be used to change the operating parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set
|
| Laptop, software & WiFi Control(Optional) | - Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial)
- Labview Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, record, and plot data for MTI furnaces
- A wireless remote control provides up to 300 meters of operating range
 
|
| Thermal Block Placement | - Two thermal blacks are included. Please picture below to learn how to place them inside a tube
- You may order flange support to avoid tube rotating (click Pic below right)
 .jpg) |
| Vacuum Level | - 10E-2 torr by a quality mechanical vacuum pump
- 10-5 torr by molecular pump
|
| Heating Elements & Thermal couples | - 24 pcs Kanthal 1650ºC grade Silicon carbide rod (12 Dia. x 150 heating x 374 lengths, mm)
- 3 pcs S type thermal couple built-in
- Please click the picture below to order a spare heating element
- Notice: Customers will install SiC rod on-site by themselves as an instruction manual due to they are easy to damage during shipping
   |
| Power Cable & Plug | - 10 feet length 10-3 AWG heavy duty UL approved power cable is included. Extra length cable can be ordered by click picture below-left
- The plug is not included. Browse our catalog for compatible plugs or obtain one from a local hardware store.
  |
| Net Weight | 160 Kg |
| Operation Instructions |  |
Warnings
 | - The tube furnaces with alumina tube are designed for use under vacuum and low pressure < 0.02 Mpa
- Never use graphite crucible in an alumina tube.
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
- Vacuum pressures may only be safely used up to 1500°C
|
| Warranty | - One year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.).
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
 | - CE Certified
- NRTL or CSA certification is available at the extra cost.
|
