(+65) 6284 3818



Vacuum Sealing Assembly for 5" ( 130 mm) Processing Tube - EQ-FL-125KF25

0.0/5 rating (0 votes)


This is a pair of smart sealing assembly (Flange Lip I.D. 130 mm) for sealing various processing tubes of vacuum tube furnace without any welding and gluing.

Package included One flange with gauge and valve, one flange with valve, two steel sealing rings, four high-temperature silicone O-rings  ( 300°C Max. and six screws).
Vacuum Level
  • Made of Stainless Steel with double high-temperature silicon O-rings on each flange.
  • One end has a vacuum gauge, needle valve with barb fitting, and 1/4'' feedthrough, the other end has a KF25 port and needle valve with barb fitting.
  • Seal tube by tightening screws on the flange without any welding and glue.
  • 1/4" rubber hose can be fitted to 1/4" hose connectors at both ends.
  • Designed for MTI GSL1700-100X tube furnaces.
  • The assembly kit will seal 120 mm diameter (472" Dia OD) ceramic and quartz tube.
Optional Parts               
Installation Video
  • Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.
  • Please do not over-tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.
  • For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive gases with our flange assemblies. Please contact us with any concerns.
Options Click here to choose flange for tube from 1"  to 11"                        Vacuum Pump & High Vacuum Station
Stainless Steel Sealing Flange Assembly for 1"-11" Processing Tubes                                                      Vacuum pump and high vacuum station   



Share this product

Register for new product information:    

Premier Solutions (PS) Pte Ltd Singapore

Please publish modules in offcanvas position.